Hi Thierry. On Mon, Nov 14, 2011 at 11:19 PM, Thierry Reding <thierry.red...@avionic-design.de> wrote: > NVIDIA's flashing tools assume that the bootloader is loaded at address > 0x00108000. Instead of requiring non-standard builds of those tools > which allow a load address of 0x00E08000, this commit just switches all > Tegra2 boards to use the standard load address. > > Note that to successfully boot a standalone U-Boot with this load > address, U-Boot needs to be built with USE_PRIVATE_LIBGCC=yes.
Would you please remove this comment? As mentioned by others on this thread it isn't affected by your change. Anyway: Tested-by: Simon Glass <s...@chromium.org> > > Signed-off-by: Thierry Reding <thierry.red...@avionic-design.de> > --- > include/configs/tegra2-common.h | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/include/configs/tegra2-common.h b/include/configs/tegra2-common.h > index 9c3b9fa..bcdfe61 100644 > --- a/include/configs/tegra2-common.h > +++ b/include/configs/tegra2-common.h > @@ -153,7 +153,7 @@ > #define PHYS_SDRAM_1 TEGRA2_SDRC_CS0 > #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */ > > -#define CONFIG_SYS_TEXT_BASE 0x00E08000 > +#define CONFIG_SYS_TEXT_BASE 0x00108000 > #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 > > #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE > -- > 1.7.7.3 > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
