Signed-off-by: Joe Hershberger <joe.hershber...@ni.com>
Cc: Joe Hershberger <joe.hershber...@gmail.com>
Cc: Kim Phillips <kim.phill...@freescale.com>
---
Changes for v2:
- Moved changes to board/freescale/mpc8313erdb/mpc8313erdb.c from patch 1/2
Changes for v3:
- Renamed gpio_init_* to mpc83xx_gpio_init_*
- Added board_early_init_r support to MPC8313ERDB targets
Changes for v4:
- Fixed build warning
Changes for v5:
Changes for v6:
Changes for v7:
- checkpatch compliance
Changes for v8:
Changes for v9:
board/freescale/mpc8313erdb/mpc8313erdb.c | 15 +++++++++++++++
include/configs/MPC8313ERDB.h | 9 +++++++--
2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c
b/board/freescale/mpc8313erdb/mpc8313erdb.c
index 08f873d..730ec4e 100644
--- a/board/freescale/mpc8313erdb/mpc8313erdb.c
+++ b/board/freescale/mpc8313erdb/mpc8313erdb.c
@@ -31,6 +31,9 @@
#include <vsc7385.h>
#include <ns16550.h>
#include <nand.h>
+#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_NAND_SPL)
+#include <asm/gpio.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -42,6 +45,18 @@ int board_early_init_f(void)
if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
gd->flags |= GD_FLG_SILENT;
#endif
+#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_NAND_SPL)
+ mpc83xx_gpio_init_f();
+#endif
+
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+#if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_NAND_SPL)
+ mpc83xx_gpio_init_r();
+#endif
return 0;
}
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 31503af..39bdcf8 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -82,7 +82,8 @@
#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r */
#define CONFIG_SYS_IMMR 0xE0000000
@@ -363,6 +364,9 @@
#define CONFIG_OF_BOARD_SETUP 1
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+#define CONFIG_MPC83XX_GPIO 1
+#define CONFIG_CMD_GPIO 1
+
/*
* Serial Port
*/
@@ -581,7 +585,8 @@
/* System IO Config */
#define CONFIG_SYS_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */
-#define CONFIG_SYS_SICRL SICRL_USBDR_10 /* Enable Internal USB Phy */
+ /* Enable Internal USB Phy and GPIO on LCD Connector */
+#define CONFIG_SYS_SICRL (SICRL_USBDR_10 | SICRL_LBC)
#define CONFIG_SYS_HID0_INIT 0x000000000
#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
--
1.6.0.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
