Hi Albert,
please pull from u-boot-imx.
The following changes since commit 06194b6b65f701a9d6ef2d9b4123c4afe57d8783:
da850: add new config file for AM18xx (2011-11-10 16:30:41 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (5):
qong: Use generic function for configuring GPR register
mx31: Remove duplicate definition for GPR register
mx31: Use proper IO accessor for GPR register
mx31: Fix checkpatch warnings in generic.c
m28evk: Fix comment about the number of RAM banks
Marek Vasut (20):
iMX28: Initial support for iMX28 CPU
iMX28: Add SSP MMC driver
FEC: Add support for iMX28 quirks
iMX28: Add PINMUX control
iMX28: Add I2C bus driver
iMX28: Add GPIO control
iMX28: Add SPI driver
iMX28: Add APBH DMA driver
iMX28: Add GPMI NAND driver
iMX28: Add driver for internal RTC
iMX28: Add image header generator tool
iMX28: Add u-boot.sb target to Makefile
iMX28: Add support for DENX M28EVK board
M28: Add MMC SPL
M28: Add doc/README.m28 documentation
iMX28: Fix ARM vector handling
M28: Add memory detection into SPL
iMX28: Add USB and USB PHY register definitions
iMX28: Add USB HOST driver
M28EVK: Enable USB HOST support
Stefano Babic (1):
MX25: zmx25: GCC4.6 fix build warnings
.gitignore | 1 +
MAINTAINERS | 1 +
Makefile | 5 +
arch/arm/cpu/arm1136/mx31/generic.c | 11 +-
arch/arm/cpu/arm926ejs/mx28/Makefile | 46 +
arch/arm/cpu/arm926ejs/mx28/clock.c | 355 +++++++
arch/arm/cpu/arm926ejs/mx28/iomux.c | 109 +++
arch/arm/cpu/arm926ejs/mx28/mx28.c | 221 +++++
arch/arm/cpu/arm926ejs/mx28/timer.c | 141 +++
arch/arm/include/asm/arch-mx28/clock.h | 61 ++
arch/arm/include/asm/arch-mx28/dma.h | 170 ++++
arch/arm/include/asm/arch-mx28/gpio.h | 32 +
arch/arm/include/asm/arch-mx28/imx-regs.h | 39 +
arch/arm/include/asm/arch-mx28/iomux-mx28.h | 537 +++++++++++
arch/arm/include/asm/arch-mx28/iomux.h | 168 ++++
arch/arm/include/asm/arch-mx28/regs-apbh.h | 466 +++++++++
arch/arm/include/asm/arch-mx28/regs-base.h | 88 ++
arch/arm/include/asm/arch-mx28/regs-bch.h | 230 +++++
arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 312 ++++++
arch/arm/include/asm/arch-mx28/regs-common.h | 66 ++
arch/arm/include/asm/arch-mx28/regs-gpmi.h | 222 +++++
arch/arm/include/asm/arch-mx28/regs-i2c.h | 207 ++++
arch/arm/include/asm/arch-mx28/regs-ocotp.h | 173 ++++
arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 1284
+++++++++++++++++++++++++
arch/arm/include/asm/arch-mx28/regs-power.h | 413 ++++++++
arch/arm/include/asm/arch-mx28/regs-rtc.h | 147 +++
arch/arm/include/asm/arch-mx28/regs-ssp.h | 349 +++++++
arch/arm/include/asm/arch-mx28/regs-timrot.h | 171 ++++
arch/arm/include/asm/arch-mx28/regs-usb.h | 178 ++++
arch/arm/include/asm/arch-mx28/regs-usbphy.h | 151 +++
arch/arm/include/asm/arch-mx28/sys_proto.h | 32 +
arch/arm/include/asm/arch-mx31/imx-regs.h | 7 +-
board/davedenx/qong/qong.c | 2 +-
board/denx/m28evk/Makefile | 56 ++
board/denx/m28evk/m28_init.h | 41 +
board/denx/m28evk/m28evk.c | 216 +++++
board/denx/m28evk/mem_init.c | 240 +++++
board/denx/m28evk/mmc_boot.c | 273 ++++++
board/denx/m28evk/power_init.c | 913 ++++++++++++++++++
board/denx/m28evk/start.S | 234 +++++
board/denx/m28evk/u-boot-spl.lds | 87 ++
board/denx/m28evk/u-boot.bd | 14 +
board/syteco/zmx25/zmx25.c | 2 -
boards.cfg | 1 +
doc/README.m28 | 223 +++++
drivers/dma/Makefile | 1 +
drivers/dma/apbh_dma.c | 691 +++++++++++++
drivers/gpio/Makefile | 1 +
drivers/gpio/mxs_gpio.c | 136 +++
drivers/i2c/Makefile | 1 +
drivers/i2c/mxs_i2c.c | 246 +++++
drivers/mmc/Makefile | 1 +
drivers/mmc/mxsmmc.c | 351 +++++++
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/mxs_nand.c | 1118 +++++++++++++++++++++
drivers/net/fec_mxc.c | 44 +-
drivers/rtc/Makefile | 1 +
drivers/rtc/mxsrtc.c | 86 ++
drivers/spi/Makefile | 1 +
drivers/spi/mxs_spi.c | 186 ++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-mxs.c | 154 +++
include/configs/m28evk.h | 303 ++++++
tools/.gitignore | 1 +
tools/Makefile | 6 +
tools/mxsboot.c | 684 +++++++++++++
66 files changed, 12697 insertions(+), 12 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/mx28/Makefile
create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/iomux.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
create mode 100644 arch/arm/include/asm/arch-mx28/dma.h
create mode 100644 arch/arm/include/asm/arch-mx28/gpio.h
create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
create mode 100644 arch/arm/include/asm/arch-mx28/iomux-mx28.h
create mode 100644 arch/arm/include/asm/arch-mx28/iomux.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-apbh.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-bch.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-gpmi.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-rtc.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-usb.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-usbphy.h
create mode 100644 arch/arm/include/asm/arch-mx28/sys_proto.h
create mode 100644 board/denx/m28evk/Makefile
create mode 100644 board/denx/m28evk/m28_init.h
create mode 100644 board/denx/m28evk/m28evk.c
create mode 100644 board/denx/m28evk/mem_init.c
create mode 100644 board/denx/m28evk/mmc_boot.c
create mode 100644 board/denx/m28evk/power_init.c
create mode 100644 board/denx/m28evk/start.S
create mode 100644 board/denx/m28evk/u-boot-spl.lds
create mode 100644 board/denx/m28evk/u-boot.bd
create mode 100644 doc/README.m28
create mode 100644 drivers/dma/apbh_dma.c
create mode 100644 drivers/gpio/mxs_gpio.c
create mode 100644 drivers/i2c/mxs_i2c.c
create mode 100644 drivers/mmc/mxsmmc.c
create mode 100644 drivers/mtd/nand/mxs_nand.c
create mode 100644 drivers/rtc/mxsrtc.c
create mode 100644 drivers/spi/mxs_spi.c
create mode 100644 drivers/usb/host/ehci-mxs.c
create mode 100644 include/configs/m28evk.h
create mode 100644 tools/mxsboot.c
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
