On 11/09/2011 03:15 PM, Fabio Estevam wrote: > Use generic function for configuring GPR register. > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> > --- > board/davedenx/qong/qong.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c > index 665aedf..c41f11d 100644 > --- a/board/davedenx/qong/qong.c > +++ b/board/davedenx/qong/qong.c > @@ -231,7 +231,7 @@ static void board_nand_setup(void) > > mxc_setup_weimcs(3, &cs3); > > - __REG(IOMUXC_GPR) |= 1 << 13; > + mx31_set_gpr(MUX_SDCTL_CSD1_SEL, 1); > > mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_WP, MUX_CTL_IN_GPIO)); > mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_CE, MUX_CTL_IN_GPIO));
Acked-by: Stefano Babic <sba...@denx.de> Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
