Fix:
mpc8548cds.c: In function 'local_bus_init':
mpc8548cds.c:87:7: warning: variable 'lbc_hz' set but not used
[-Wunused-but-set-variable]
mpc8548cds.c: In function 'lbc_sdram_init':
mpc8548cds.c:121:7: warning: variable 'cpu_board_rev' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala <ga...@kernel.crashing.org>
---
board/freescale/mpc8548cds/mpc8548cds.c | 4 ----
1 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c
b/board/freescale/mpc8548cds/mpc8548cds.c
index d33ef7e..e5563f7 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -84,12 +84,10 @@ local_bus_init(void)
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint clkdiv;
- uint lbc_hz;
sys_info_t sysinfo;
get_sys_info(&sysinfo);
clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
- lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
gur->lbiuiplldcr1 = 0x00078080;
if (clkdiv == 16) {
@@ -118,7 +116,6 @@ void lbc_sdram_init(void)
uint idx;
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
- uint cpu_board_rev;
uint lsdmr_common;
puts("LBC SDRAM: ");
@@ -140,7 +137,6 @@ void lbc_sdram_init(void)
/*
* MPC8548 uses "new" 15-16 style addressing.
*/
- cpu_board_rev = get_cpu_board_revision();
lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
lsdmr_common |= LSDMR_BSMA1516;
--
1.7.3.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
