There is only one bank of NOR flash memory on ICU862 boards.
Remove code that attempts to deal with a second bank.
This also fixes build warnings:
flash.c: In function 'flash_init':
flash.c:120:12: warning: array subscript is above array bounds
[-Warray-bounds]
flash.c:121:12: warning: array subscript is above array bounds
[-Warray-bounds]
flash.c:124:12: warning: array subscript is above array bounds
[-Warray-bounds]
Signed-off-by: Wolfgang Denk <w...@denx.de>
---
board/icu862/flash.c | 32 +++-----------------------------
1 files changed, 3 insertions(+), 29 deletions(-)
diff --git a/board/icu862/flash.c b/board/icu862/flash.c
index 2afeff4..7f72258 100644
--- a/board/icu862/flash.c
+++ b/board/icu862/flash.c
@@ -52,13 +52,12 @@ unsigned long flash_init (void)
{
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size_b0, size_b1;
+ unsigned long size_b0;
int i;
/* Init: no FLASHes known */
- for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
flash_info[i].flash_id = FLASH_UNKNOWN;
- }
/* Static FLASH Bank configuration here - FIXME XXX */
@@ -70,27 +69,6 @@ unsigned long flash_init (void)
size_b0 >> 20);
}
- if (FLASH_BASE1_PRELIM != 0x0) {
- size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM,
&flash_info[1]);
-
- if (size_b1 > size_b0) {
- printf ("## ERROR: Bank 1 (0x%08lx = %ld MB)"
- " > Bank 0 (0x%08lx = %ld MB)\n",
- size_b1, size_b1 >> 20,
- size_b0, size_b0 >> 20);
-
- flash_info[0].flash_id = FLASH_UNKNOWN;
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[0].sector_count = -1;
- flash_info[1].sector_count = -1;
- flash_info[0].size = 0;
- flash_info[1].size = 0;
- return (0);
- }
- } else {
- size_b1 = 0;
- }
-
/* Remap FLASH according to real size */
memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM |
BR_V;
@@ -117,13 +95,9 @@ unsigned long flash_init (void)
#endif
/* ICU862 Board has only one Flash Bank */
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
-
flash_info[0].size = size_b0;
- flash_info[1].size = size_b1;
- return (size_b0 + size_b1);
+ return size_b0;
}
--
1.7.6.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
