Albert,
Please pull u-boot-ti/master
Regards,
Sandeep
The following changes since commit ce5207e191c59b3135303fd03b98dd2ac3701ba2:
Kyle Moffett (1):
e1000: Allow direct access to the E1000 SPI EEPROM device
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
Bastian Ruppert (4):
Davinci: ea20: set console on UART0
Davinci: ea20: set GPIOs to hold MII-Phy in reset and set UART0-Switch
for console
Davinci: ea20: add gpio for keeping power on in board_late_init
Davinci: ea20: add gpios for LCD backlight control
Christian Riesch (1):
arm, davinci: Add function lpsc_syncreset()
Heiko Schocher (13):
arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD
arm, arm926: fix missing symbols in NAND_SPL mode
usb, davinci: add enable_vbus() weak function
arm, usb, davinci: make USBPHY_CTL register configurable
net, davinci_emac: make clock divider in MDIO control register
configurable
spl: add option for adding post memory test to the SPL framework
arm, davinci: add support for new spl framework
spl, nand: add 4bit HW ecc oob first nand_read_page function
arm, davinci: add header files for dm365
arm, davinci: add lowlevel function for dm365 soc
arm926ejs, davinci: add cpuinfo for dm365
arm926ejs, davinci: add missing spi defines for dm365
arm, davinci: add cam_enc_4xx support
Ilya Yanok (2):
davinci_emac: compilation fix, phy is array now
omap/spl: actually enable the console
Sanjeev Premi (7):
omap3evm: Set environment variable 'ethaddr'
omap3evm: Reorder related config options
omap3evm: Prepare to split configuration
omap3evm: move common config options to new file
omap3evm: Add (quick) configuration for MMC/SD only
omap3evm: Add (quick) configuration for NAND only
omap3evm: fix errors caused by multiple definitions
Stefano Babic (8):
Davinci: ea20: Add NAND support
Davinci: ea20: Add early init to get early output from console
Davinci: ea20: Add default U-Boot environment
ARM: Davinci: added missing registers to hardware.h
VIDEO: davinci: add framebuffer to da8xx
Davinci: ea20: added video support
Davinci: ea20: added I2C support
Davinci: ea20: added PREBOOT to configuration
MAINTAINERS | 1 +
Makefile | 8 +-
README | 5 +
arch/arm/cpu/arm926ejs/davinci/Makefile | 5 +
arch/arm/cpu/arm926ejs/davinci/cpu.c | 27 +-
arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c | 439 ++++++++++
arch/arm/cpu/arm926ejs/davinci/psc.c | 20 +-
arch/arm/cpu/arm926ejs/davinci/spl.c | 63 ++
arch/arm/cpu/arm926ejs/start.S | 31 +-
arch/arm/cpu/armv7/omap-common/spl.c | 2 +
arch/arm/include/asm/arch-davinci/aintc_defs.h | 50 ++
arch/arm/include/asm/arch-davinci/da8xx-fb.h | 126 +++
arch/arm/include/asm/arch-davinci/dm365_lowlevel.h | 41 +
arch/arm/include/asm/arch-davinci/hardware.h | 27 +-
arch/arm/include/asm/arch-davinci/pll_defs.h | 84 ++
arch/arm/include/asm/arch-davinci/psc_defs.h | 86 ++
arch/arm/include/asm/arch-davinci/syscfg_defs.h | 66 ++
board/ait/cam_enc_4xx/Makefile | 46 ++
board/ait/cam_enc_4xx/cam_enc_4xx.c | 446 +++++++++++
board/ait/cam_enc_4xx/config.mk | 15 +
board/ait/cam_enc_4xx/u-boot-spl.lds | 73 ++
board/ait/cam_enc_4xx/ublimage.cfg | 48 ++
board/davinci/common/misc.c | 2 +-
board/davinci/ea20/ea20.c | 205 ++++-
board/ti/evm/evm.c | 15 +
boards.cfg | 3 +
doc/README.SPL | 2 +
doc/README.davinci.nand_spl | 141 ++++
drivers/mtd/nand/Makefile | 3 +
drivers/mtd/nand/nand_spl_load.c | 56 ++
drivers/mtd/nand/nand_spl_simple.c | 43 +-
drivers/net/davinci_emac.c | 11 +-
drivers/usb/musb/davinci.c | 20 +-
drivers/video/Makefile | 1 +
drivers/video/da8xx-fb.c | 846 ++++++++++++++++++++
include/configs/cam_enc_4xx.h | 453 +++++++++++
include/configs/ea20.h | 126 +++-
include/configs/omap3_evm.h | 331 ++-------
include/configs/omap3_evm_common.h | 292 +++++++
include/configs/omap3_evm_quick_mmc.h | 91 +++
include/configs/omap3_evm_quick_nand.h | 79 ++
spl/Makefile | 1 +
tools/ublimage.h | 2 +-
43 files changed, 4098 insertions(+), 334 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
create mode 100644 arch/arm/cpu/arm926ejs/davinci/spl.c
create mode 100644 arch/arm/include/asm/arch-davinci/aintc_defs.h
create mode 100644 arch/arm/include/asm/arch-davinci/da8xx-fb.h
create mode 100644 arch/arm/include/asm/arch-davinci/dm365_lowlevel.h
create mode 100644 arch/arm/include/asm/arch-davinci/pll_defs.h
create mode 100644 arch/arm/include/asm/arch-davinci/psc_defs.h
create mode 100644 arch/arm/include/asm/arch-davinci/syscfg_defs.h
create mode 100644 board/ait/cam_enc_4xx/Makefile
create mode 100644 board/ait/cam_enc_4xx/cam_enc_4xx.c
create mode 100644 board/ait/cam_enc_4xx/config.mk
create mode 100644 board/ait/cam_enc_4xx/u-boot-spl.lds
create mode 100644 board/ait/cam_enc_4xx/ublimage.cfg
create mode 100644 doc/README.davinci.nand_spl
create mode 100644 drivers/mtd/nand/nand_spl_load.c
create mode 100644 drivers/video/da8xx-fb.c
create mode 100644 include/configs/cam_enc_4xx.h
create mode 100644 include/configs/omap3_evm_common.h
create mode 100644 include/configs/omap3_evm_quick_mmc.h
create mode 100644 include/configs/omap3_evm_quick_nand.h
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
