Hi Ilya,
On 11/02/11 01:16, Ilya Yanok wrote:
> This patch adds support for the HTKW mcx AM3517-based board.
> Serial, Ethernet, NAND, MMC, RTC, EHCI USB host and both
> NAND and MMC SPLs are supported.
>
> Requires updated mach-types file.
>
> Signed-off-by: Ilya Yanok <ya...@emcraft.com>
> ---
> MAINTAINERS | 4 +
> board/htkw/mcx/Makefile | 38 +++++
> board/htkw/mcx/mcx.c | 89 ++++++++++
> board/htkw/mcx/mcx.h | 408
> +++++++++++++++++++++++++++++++++++++++++++++++
> boards.cfg | 1 +
> include/configs/mcx.h | 378 +++++++++++++++++++++++++++++++++++++++++++
> 6 files changed, 918 insertions(+), 0 deletions(-)
> create mode 100644 board/htkw/mcx/Makefile
> create mode 100644 board/htkw/mcx/mcx.c
> create mode 100644 board/htkw/mcx/mcx.h
> create mode 100644 include/configs/mcx.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 576fea8..8df5530 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -886,6 +886,10 @@ Richard Woodruff <r-woodru...@ti.com>
>
> omap2420h4 ARM1136EJS
>
> +Ilya Yanok <ya...@emcraft.com>
> +
> + mcx ARM ARMV7 (AM35x SoC)
> +
> Syed Mohammed Khasim <sm.kha...@gmail.com>
> Sughosh Ganu <urwithsugh...@gmail.com>
>
> diff --git a/board/htkw/mcx/Makefile b/board/htkw/mcx/Makefile
> new file mode 100644
> index 0000000..4c8db10
> --- /dev/null
> +++ b/board/htkw/mcx/Makefile
> @@ -0,0 +1,38 @@
> +#
> +# Copyright (C) 2011 Ilya Yanok, Emcraft Systems
> +#
> +# Based on ti/evm/Makefile
> +#
> +# This program is free software; you can redistribute it and/or modify
> +# it under the terms of the GNU General Public License as published by
> +# the Free Software Foundation; either version 2 of the License, or
> +# (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc.
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB = $(obj)lib$(BOARD).o
> +
> +COBJS := $(BOARD).o
> +
> +SRCS := $(COBJS:.o=.c)
> +OBJS := $(addprefix $(obj),$(COBJS))
> +
> +$(LIB): $(obj).depend $(OBJS)
> + $(call cmd_link_o_target, $(OBJS))
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
> new file mode 100644
> index 0000000..511aac4
> --- /dev/null
> +++ b/board/htkw/mcx/mcx.c
> @@ -0,0 +1,89 @@
> +/*
> + * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
> + *
> + * Based on ti/evm/evm.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc.
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/mem.h>
> +#include <asm/arch/mmc_host_def.h>
> +#include <asm/arch/mux.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/mach-types.h>
> +#include <asm/gpio.h>
> +#include <asm/omap_gpio.h>
> +#include <i2c.h>
> +#include "mcx.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/*
> + * Routine: board_init
> + * Description: Early hardware init.
> + */
> +int board_init(void)
> +{
> + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
> + /* boot param addr */
> + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
> +
> + return 0;
> +}
> +
> +/*
> + * Routine: misc_init_r
> + * Description: Init i2c, ethernet, etc... (done here so udelay works)
> + */
> +int misc_init_r(void)
> +{
> + dieid_num_r();
> +
> + return 0;
> +}
> +
> +/*
> + * Routine: set_muxconf_regs
> + * Description: Setting up the configuration Mux registers specific to the
> + * hardware. Many pins need to be moved from protect to primary
> + * mode.
> + */
> +void set_muxconf_regs(void)
> +{
> + MUX_MCX();
> +}
> +
> +#if defined(CONFIG_GENERIC_MMC) && defined(CONFIG_OMAP_HSMMC) && \
> + !defined(CONFIG_SPL_BUILD)
> +int board_mmc_init(bd_t *bis)
> +{
> + omap_mmc_init(0);
> + return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_USB_EHCI_OMAP
> +#define USB_HOST_PWR_EN 132
> +int board_usb_init(void)
> +{
> + gpio_request(USB_HOST_PWR_EN, "USB_HOST_PWR_EN");
> + gpio_direction_output(USB_HOST_PWR_EN, 1);
> + gpio_set_value(USB_HOST_PWR_EN, 1);
gpio_direction_output(x, y) already sets a value,
you don't need to call gpio_set_value() afterwards.
This also holds for 13/14 patch.
> +
> + return 0;
> +}
> +#endif
> diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h
> new file mode 100644
> index 0000000..d675a48
> --- /dev/null
> +++ b/board/htkw/mcx/mcx.h
> @@ -0,0 +1,408 @@
> +/*
> + * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
> + *
> + * Based on ti/evm/evm.h
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc.
> + */
> +
> +#ifndef _AM3517EVM_H_
> +#define _AM3517EVM_H_
> +
> +const omap3_sysinfo sysinfo = {
> + DDR_DISCRETE,
> + "HTKW mcx Board",
> + "NAND",
> +};
> +
> +/*
> + * IEN - Input Enable
> + * IDIS - Input Disable
> + * PTD - Pull type Down
> + * PTU - Pull type Up
> + * DIS - Pull type selection is inactive
> + * EN - Pull type selection is active
> + * M0 - Mode 0
> + * The commented string gives the final mux configuration for that pin
> + */
> +#define MUX_MCX() \
> + /* SDRC */\
> + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \
> + MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \
> + MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \
> + MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \
> + MUX_VAL(CP(SDRC_CKE0), (M0)) \
> + MUX_VAL(CP(SDRC_CKE1), (M0)) \
> + MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \
> + /*sdrc_strben_dly0*/\
> + MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \
> + /*sdrc_strben_dly1*/\
> + /* GPMC */\
> + MUX_VAL(CP(GPMC_A1), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_A2), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_A3), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_A4), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_A5), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_A6), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_A7), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_A8), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_A9), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | DIS | M4)) \
> + /* GPIO_43 LCD buffer enable */ \
> + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_NCS1), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_NCS2), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M4))\
> + MUX_VAL(CP(GPMC_NCS5), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_NCS6), (IEN | PTU | EN | M4)) \
> + /* GPIO_57 TS_PenIRQn */\
> + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M4)) \
> + /* GPIO_58 ETHERNET RESET */\
> + MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | DIS | M4)) \
> + /* GPIO_61 SD-CARD CD */ \
> + MUX_VAL(CP(GPMC_NWP), (IDIS | PTU | EN | M4)) \
> + /* GPIO_62 Nand write protect, keep enabled */ \
> + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4))\
> + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4))\
> + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) \
> + /* GPIO_65 SD-CARD WP */\
> + /* DSS */\
> + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA0), (IEN | PTU | EN | M4))\
> + MUX_VAL(CP(DSS_DATA1), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(DSS_DATA2), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA8), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(DSS_DATA9), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0))\
> + MUX_VAL(CP(DSS_DATA16), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(DSS_DATA17), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(DSS_DATA18), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \
> + /* CAMERA */\
> + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(CAM_XCLKA), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(CAM_FLD), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_D0), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_D1), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_D2), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_D3), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_D4), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_D5), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_D6), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_D7), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_D8), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_D9), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_D10), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_D11), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_XCLKB), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_WEN), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CAM_STROBE), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | EN | M4)) \
> + /* MMC */\
> + MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \
> + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \
> + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \
> + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \
> + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \
> + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \
> + \
> + MUX_VAL(CP(MMC2_CLK), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(MMC2_CMD), (IDIS | PTD | DIS | M4)) \
> + /* GPIO_131 LCD Enable */ \
> + MUX_VAL(CP(MMC2_DAT0), (IDIS | PTD | DIS | M4)) \
> + /* GPIO_132 USB host Enable */\
> + MUX_VAL(CP(MMC2_DAT1), (IDIS | PTD | DIS | M4)) \
> + /* GPIO_133 HDMI PD */\
> + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4))\
> + /* McBSP */\
> + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \
> + MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \
> + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \
> + \
> + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTU | EN | M4))\
> + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(MCBSP2_DR), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(MCBSP2_DX), (IEN | PTU | EN | M4))\
> + \
> + MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(MCBSP3_FSX), (IEN | PTU | EN | M4))\
> + \
> + MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)) \
> + /* GPIO_152 USB phy2 reset */\
> + MUX_VAL(CP(MCBSP4_DR), (IEN | PTU | EN | M4)) \
> + /* GPIO_153 */\
> + MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) \
> + /* GPIO_154 USB phy1 reset */\
> + MUX_VAL(CP(MCBSP4_FSX), (IEN | PTU | EN | M4)) \
> + /* GPIO_155 TS_BUSY */\
> + /* UART */\
> + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) \
> + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \
> + \
> + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \
> + \
> + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | DIS | M0)) \
> + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) \
> + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \
> + /* I2C */\
> + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \
> + /* McSPI */\
> + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \
> + MUX_VAL(CP(MCSPI1_CS1), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M3)) \
> + /* HSUSB2_dat7 */\
> + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M3)) \
> + /* HSUSB2_dat4 */\
> + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M3)) \
> + /* HSUSB2_dat5 */\
> + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | DIS | M3)) \
> + /* HSUSB2_dat6 */\
> + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | DIS | M3)) \
> + /* HSUSB2_dat3 */\
> + /* CCDC */\
> + MUX_VAL(CP(CCDC_PCLK), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CCDC_HD), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CCDC_VD), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CCDC_WEN), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | EN | M4)) \
> + /* RMII */\
> + MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \
> + MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \
> + MUX_VAL(CP(RMII_RXD0), (IEN | PTD | M0)) \
> + MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \
> + MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \
> + MUX_VAL(CP(RMII_RXER), (PTD | M0)) \
> + MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \
> + MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \
> + MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \
> + MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \
> + /* HECC */\
> + MUX_VAL(CP(HECC1_TXD), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(HECC1_RXD), (IEN | PTD | EN | M4)) \
> + /* HSUSB */\
> + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \
> + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \
> + /* HDQ */\
> + MUX_VAL(CP(HDQ_SIO), (IEN | PTD | EN | M4)) \
> + /* Control and debug */\
> + MUX_VAL(CP(SYS_32K), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SYS_NIRQ), (IEN | PTD | EN | M4)) \
> + MUX_VAL(CP(SYS_NRESWARM), (IEN | PTU | DIS | M4)) \
> + /* SYS_nRESWARM */\
> + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) \
> + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) \
> + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) \
> + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) \
> + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) \
> + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4))\
> + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4))\
> + MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | DIS | M4)) \
> + MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | DIS | M4)) \
> + \
> + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M4))\
> + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4))\
> + /* JTAG */\
> + MUX_VAL(CP(JTAG_nTRST), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(JTAG_TCK), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(JTAG_TMS), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(JTAG_TDI), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(JTAG_EMU0), (IEN | PTU | EN | M4)) \
> + MUX_VAL(CP(JTAG_EMU1), (IEN | PTU | EN | M4))\
> + /* ETK (ES2 onwards) */\
> + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTD | DIS | M3)) \
> + /* hsusb1_stp */ \
> + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)) \
> + /* hsusb1_clk */\
> + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | EN | M3)) \
> + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M3)) \
> + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3)) \
> + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | EN | M3)) \
> + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | EN | M3)) \
> + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | EN | M3)) \
> + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | EN | M3)) \
> + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | EN | M3)) \
> + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)) \
> + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)) \
> + MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M4)) \
> + MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M4)) \
> + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M4)) \
> + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M4)) \
> + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M4)) \
> + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M4)) \
> + /* Die to Die */\
> + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \
> + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \
> + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \
> + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \
> + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \
> + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \
> + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \
> + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \
> + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \
> + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) \
> +
> +#endif
> diff --git a/boards.cfg b/boards.cfg
> index 604becf..97c9e47 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -185,6 +185,7 @@ omap3_beagle arm armv7
> beagle ti
> omap3_evm arm armv7 evm ti
> omap3
> omap3_sdp3430 arm armv7 sdp3430 ti
> omap3
> devkit8000 arm armv7 devkit8000
> timll omap3
> +mcx arm armv7 mcx
> htkw omap3
> omap4_panda arm armv7 panda ti
> omap4
> omap4_sdp4430 arm armv7 sdp4430 ti
> omap4
> s5p_goni arm armv7 goni
> samsung s5pc1xx
> diff --git a/include/configs/mcx.h b/include/configs/mcx.h
> new file mode 100644
> index 0000000..a8b2e39
> --- /dev/null
> +++ b/include/configs/mcx.h
> @@ -0,0 +1,378 @@
> +/*
> + * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
> + *
> + * Based on omap3_evm_config.h
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc.
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/*
> + * High Level Configuration Options
> + */
> +#define CONFIG_OMAP /* in a TI OMAP core */
> +#define CONFIG_OMAP34XX /* which is a 34XX */
> +#define CONFIG_OMAP3_MCX /* working with mcx */
> +
> +#define CONFIG_MACH_TYPE MACH_TYPE_MCX
> +
> +#define CONFIG_SYS_CACHELINE_SIZE 64
> +
> +#define CONFIG_EMIF4 /* The chip has EMIF4 controller */
> +
> +#include <asm/arch/cpu.h> /* get chip and board defs */
> +#include <asm/arch/omap3.h>
> +
> +#define CONFIG_OF_LIBFDT
> +#define CONFIG_FIT
> +
> +#define CONFIG_SYS_TEXT_BASE 0x80008000
> +
> +/*
> + * Display CPU and Board information
> + */
> +#define CONFIG_DISPLAY_CPUINFO
> +#define CONFIG_DISPLAY_BOARDINFO
> +
> +/* Clock Defines */
> +#define V_OSCK 26000000 /* Clock output from T2
> */
> +#define V_SCLK (V_OSCK >> 1)
> +
> +#undef CONFIG_USE_IRQ /* no support for IRQs
> */
> +#define CONFIG_MISC_INIT_R
> +
> +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_INITRD_TAG
> +#define CONFIG_REVISION_TAG
> +
> +/*
> + * Size of malloc() pool
> + */
> +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB
> sector */
> +#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
> +/*
> + * DDR related
> + */
> +#define CONFIG_OMAP3_MICRON_DDR /* Micron DDR */
> +#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024)
> +
> +/*
> + * Hardware drivers
> + */
> +
> +/*
> + * NS16550 Configuration
> + */
> +#define V_NS16550_CLK 48000000 /* 48MHz
> (APLL96/2) */
> +
> +#define CONFIG_SYS_NS16550
> +#define CONFIG_SYS_NS16550_SERIAL
> +#define CONFIG_SYS_NS16550_REG_SIZE (-4)
> +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
> +
> +/*
> + * select serial console configuration
> + */
> +#define CONFIG_CONS_INDEX 3
> +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
> +#define CONFIG_SERIAL3 3 /* UART3 */
> +
> +/* allow to overwrite serial and ethaddr */
> +#define CONFIG_ENV_OVERWRITE
> +#define CONFIG_BAUDRATE 115200
> +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
> + 115200}
> +#define CONFIG_MMC
> +#define CONFIG_OMAP_HSMMC
> +#define CONFIG_GENERIC_MMC
> +#define CONFIG_DOS_PARTITION
> +
> +/* EHCI */
> +#define CONFIG_USB_STORAGE
> +#define CONFIG_OMAP3_GPIO_5
> +#define CONFIG_USB_EHCI
> +#define CONFIG_USB_EHCI_OMAP
> +/*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */
> +#define CONFIG_OMAP_EHCI_PHY1_RESET 154
> +#define CONFIG_OMAP_EHCI_PHY2_RESET 152
> +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
> +
> +/* commands to include */
> +#include <config_cmd_default.h>
> +
> +#define CONFIG_CMD_EXT2 /* EXT2 Support */
> +#define CONFIG_CMD_FAT /* FAT support */
> +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
> +
> +#define CONFIG_CMD_DATE
> +#define CONFIG_CMD_I2C /* I2C serial bus support */
> +#define CONFIG_CMD_MMC /* MMC support */
> +#define CONFIG_CMD_FAT /* FAT support */
> +#define CONFIG_CMD_USB
> +#define CONFIG_CMD_NAND /* NAND support */
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_CACHE
> +#define CONFIG_CMD_UBI
> +#define CONFIG_CMD_UBIFS
> +#define CONFIG_RBTREE
> +#define CONFIG_LZO
> +#define CONFIG_MTD_PARTITIONS
> +#define CONFIG_MTD_DEVICE
> +#define CONFIG_CMD_MTDPARTS
> +
> +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
> +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
> +#undef CONFIG_CMD_IMI /* iminfo */
> +#undef CONFIG_CMD_IMLS /* List all found images */
> +
> +#define CONFIG_SYS_NO_FLASH
> +#define CONFIG_HARD_I2C
> +#define CONFIG_SYS_I2C_SPEED 100000
> +#define CONFIG_SYS_I2C_SLAVE 1
> +#define CONFIG_SYS_I2C_BUS 0
> +#define CONFIG_DRIVER_OMAP34XX_I2C
> +
> +/* RTC */
> +#define CONFIG_RTC_DS1337
> +#define CONFIG_SYS_I2C_RTC_ADDR 0x68
> +
> +#define CONFIG_CMD_NET
> +#define CONFIG_CMD_MII
> +#define CONFIG_CMD_NFS
> +/*
> + * Board NAND Info.
> + */
> +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
> + /* to access nand */
> +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
> + /* to access */
> + /* nand at CS0 */
> +
> +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
> + /* NAND devices */
> +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
> +
> +#define CONFIG_JFFS2_NAND
> +/* nand device jffs2 lives on */
> +#define CONFIG_JFFS2_DEV "nand0"
> +/* start of jffs2 partition */
> +#define CONFIG_JFFS2_PART_OFFSET 0x680000
> +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2
> part */
> +
> +/* Environment information */
> +#define CONFIG_BOOTDELAY 10
> +
> +#define CONFIG_BOOTFILE "uImage"
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "loadaddr=0x82000000\0" \
> + "console=ttyO2,115200n8\0" \
> + "mmcargs=setenv bootargs console=${console} " \
> + "root=/dev/mmcblk0p2 rw " \
> + "rootfstype=ext3 rootwait\0" \
> + "nandargs=setenv bootargs console=${console} " \
> + "root=/dev/mtdblock4 rw " \
> + "rootfstype=jffs2\0" \
> + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
> + "bootscript=echo Running bootscript from mmc ...; " \
> + "source ${loadaddr}\0" \
> + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
> + "mmcboot=echo Booting from mmc ...; " \
> + "run mmcargs; " \
> + "bootm ${loadaddr}\0" \
> + "nandboot=echo Booting from nand ...; " \
> + "run nandargs; " \
> + "nand read ${loadaddr} 280000 400000; " \
> + "bootm ${loadaddr}\0" \
> +
> +#define CONFIG_BOOTCOMMAND \
> + "if mmc init; then " \
> + "if run loadbootscript; then " \
> + "run bootscript; " \
> + "else " \
> + "if run loaduimage; then " \
> + "run mmcboot; " \
> + "else run nandboot; " \
> + "fi; " \
> + "fi; " \
> + "else run nandboot; fi"
> +
> +#define CONFIG_AUTO_COMPLETE
> +/*
> + * Miscellaneous configurable options
> + */
> +#define V_PROMPT "mcx # "
> +
> +#define CONFIG_SYS_LONGHELP /* undef to save memory */
> +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
> +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
> +#define CONFIG_SYS_PROMPT V_PROMPT
> +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
> +/* Print Buffer Size */
> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
> + sizeof(CONFIG_SYS_PROMPT) + 16)
> +#define CONFIG_SYS_MAXARGS 32 /* max number of command */
> + /* args */
> +/* Boot Argument Buffer Size */
> +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
> +/* memtest works on */
> +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
> +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
> + 0x01F00000) /* 31MB */
> +
> +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
> + /* address */
> +
> +/*
> + * AM3517 has 12 GP timers, they can be driven by the system clock
> + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
> + * This rate is divided by a local divisor.
> + */
> +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
> +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1)
> => 8 */
> +#define CONFIG_SYS_HZ 1000
> +
> +/*-----------------------------------------------------------------------
> + * Stack sizes
> + *
> + * The stack sizes are set up in start.S using the settings below
> + */
> +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
> +#ifdef CONFIG_USE_IRQ
> +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
> +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
> +#endif
> +
> +/*-----------------------------------------------------------------------
> + * Physical Memory Map
> + */
> +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
> +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
> +#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
> +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
> +
> +/*-----------------------------------------------------------------------
> + * FLASH and environment organization
> + */
> +
> +/* **** PISMO SUPPORT *** */
> +
> +/* Configure the PISMO */
> +#define PISMO1_NAND_SIZE GPMC_SIZE_128M
> +
> +#define CONFIG_NAND_OMAP_GPMC
> +#define GPMC_NAND_ECC_LP_x16_LAYOUT
> +#define CONFIG_ENV_IS_IN_NAND
> +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
> +
> +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
> +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
> +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
> +
> +/*-----------------------------------------------------------------------
> + * CFI FLASH driver setup
> + */
> +/* timeout values are in ticks */
> +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
> +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
> +
> +/* Flash banks JFFS2 should use */
> +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
> + CONFIG_SYS_MAX_NAND_DEVICE)
> +#define CONFIG_SYS_JFFS2_MEM_NAND
> +/* use flash_info[2] */
> +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
> +#define CONFIG_SYS_JFFS2_NUM_BANKS 1
> +
> +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
> +#define CONFIG_SYS_INIT_RAM_SIZE 0x800
> +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
> + CONFIG_SYS_INIT_RAM_SIZE - \
> + GENERATED_GBL_DATA_SIZE)
> +
> +/* Defines for SPL */
> +#define CONFIG_SPL
> +#define CONFIG_SPL_NAND_SIMPLE
> +#define CONFIG_SPL_NAND_SOFTECC
> +#define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000 /* below malloc */
> +
> +#define CONFIG_SPL_LIBCOMMON_SUPPORT
> +#define CONFIG_SPL_LIBDISK_SUPPORT
> +#define CONFIG_SPL_I2C_SUPPORT
> +#define CONFIG_SPL_MMC_SUPPORT
> +#define CONFIG_SPL_FAT_SUPPORT
> +#define CONFIG_SPL_LIBGENERIC_SUPPORT
> +#define CONFIG_SPL_SERIAL_SUPPORT
> +#define CONFIG_SPL_POWER_SUPPORT
> +#define CONFIG_SPL_NAND_SUPPORT
> +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
> +
> +#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
> +#define CONFIG_SPL_MAX_SIZE 0xB400 /* 45 K */
> +#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
> +
> +#define CONFIG_SYS_SPL_MALLOC_START 0x8f000000
> +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
> +#define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */
> +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
> +
> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address
> 0x60000 */
> +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
> +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
> +
> +/* NAND boot config */
> +#define CONFIG_SYS_NAND_PAGE_COUNT 64
> +#define CONFIG_SYS_NAND_PAGE_SIZE 2048
> +#define CONFIG_SYS_NAND_OOBSIZE 64
> +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
> +#define CONFIG_SYS_NAND_5_ADDR_CYCLE
> +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
> +#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46,
> 47,\
> + 48, 49, 50, 51, 52, 53, 54, 55,\
> + 56, 57, 58, 59, 60, 61, 62, 63}
> +#define CONFIG_SYS_NAND_ECCSIZE 256
> +#define CONFIG_SYS_NAND_ECCBYTES 3
> +
> +#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \
> + CONFIG_SYS_NAND_ECCSIZE)
> +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
> + CONFIG_SYS_NAND_ECCSTEPS)
> +
> +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
> +
> +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
> +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x60000
> +
> +/*
> + * ethernet support
> + *
> + */
> +#if defined(CONFIG_CMD_NET)
> +#define CONFIG_DRIVER_TI_EMAC
> +#define CONFIG_DRIVER_TI_EMAC_USE_RMII
> +#define CONFIG_MII
> +#define CONFIG_BOOTP_DEFAULT
alignment?
> +#define CONFIG_BOOTP_DNS
> +#define CONFIG_BOOTP_DNS2
> +#define CONFIG_BOOTP_SEND_HOSTNAME
> +#define CONFIG_NET_RETRY_COUNT 10
> +#endif
> +
> +#endif /* __CONFIG_H */
--
Regards,
Igor.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
