On Mon, Oct 31, 2011 at 3:09 PM, Scott Wood <scottw...@freescale.com> wrote:
> On 10/30/2011 11:53 PM, Heiko Schocher wrote:
>> diff --git a/arch/arm/cpu/arm926ejs/davinci/spl_nand.c
>> b/arch/arm/cpu/arm926ejs/davinci/spl_nand.c
>> new file mode 100644
>> index 0000000..efc0521
>> --- /dev/null
>> +++ b/arch/arm/cpu/arm926ejs/davinci/spl_nand.c
>> @@ -0,0 +1,57 @@
>> +/*
>> + * Copyright (C) 2011
>> + * Heiko Schocher, DENX Software Engineering, h...@denx.de.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#include <common.h>
>> +#include <nand.h>
>> +#include <asm/io.h>
>
> Does this file use anything from asm/io.h?
>
>> +/*
>> + * The main entry for NAND booting. It's necessary that SDRAM is already
>> + * configured and available since this code loads the main U-Boot image
>> + * from NAND into SDRAM and starts it from there.
>> + */
>> +void nand_boot(void)
>> +{
>> + int ret;
>> + __attribute__((noreturn)) void (*uboot)(void);
>> +
>> + /*
>> + * Load U-Boot image from NAND into RAM
>> + */
>> + ret = nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
>> + CONFIG_SYS_NAND_U_BOOT_SIZE,
>> + (void *)CONFIG_SYS_NAND_U_BOOT_DST);
>> +
>> +#ifdef CONFIG_NAND_ENV_DST
>> + ret = nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
>> + (void *)CONFIG_NAND_ENV_DST);
>> +
>> +#ifdef CONFIG_ENV_OFFSET_REDUND
>> + ret = nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
>> + (void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
>> +#endif
>> +#endif
>> +
>> + /*
>> + * Jump to U-Boot image
>> + */
>> + uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
>> + (*uboot)();
>> +}
>
> This is common to most NAND SPLs. It would be nice to stick this in a
> common place (at least the loading part, maybe not the jump). Not
> nand_spl_simple.c, as it's utility is not limited to the simple driver.
> Maybe drivers/mtd/nand/nand_spl_load.c?
Indeed, the difference right here between davinci and omap*(/am335x)
is parsing u-boot.img for the size or just using a hard-coded size
variable.
--
Tom
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
