On 10/30/2011 02:18 PM, Wolfgang Denk wrote: > Signed-off-by: Wolfgang Denk <w...@denx.de> > cc: Stefano Babic <sba...@denx.de> > --- > include/configs/tx25.h | 4 ++++ > 1 files changed, 4 insertions(+), 0 deletions(-) > > diff --git a/include/configs/tx25.h b/include/configs/tx25.h > index 8cb57ff..39d551e 100644 > --- a/include/configs/tx25.h > +++ b/include/configs/tx25.h > @@ -29,6 +29,10 @@ > #define CONFIG_MX25_CLK32 32000 /* OSC32K frequency */ > #define CONFIG_SYS_HZ 1000 > > +#ifndef MACH_TYPE_TX25 > +#define MACH_TYPE_TX25 2177 > +#endif > + > #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for > U-Boot */ >
Thanks for reporting, but.... ..I have already sent a fix for this last week, using also the standard mechanism in arch/arm/lib/board.c to set the mach-id: http://patchwork.ozlabs.org/patch/122357/ As a fix, I have already applied it and I inserted it in my pull-request ro Albert. The patch is already in u-boot-arm and as far as I have tested, there should be no broken IMX boards due to missing mach type. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
