On 10/27/2011 01:54 PM, Scott Wood wrote: > On 10/26/2011 09:29 PM, chang-ming.hu...@freescale.com wrote: >> From: Jerry Huang <chang-ming.hu...@freescale.com> >> >> This patch: >> 1. Support 512MB DDR. >> 2. Support 33.33MHz oscillator. >> 3. QE clock is changed to 500MHz as the default value. >> >> The new MPC8360EMDS board changes the oscillator to 33.33MHz in order to >> support QE 500MHZ and this new board supports 512MB DDR since 2008, >> but the u-boot only supports 256MB DDR and 66.6MHz oscillator on top tree, > [snip] >> diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h >> index 49d64a5..b4b385a 100644 >> --- a/include/configs/MPC8360EMDS.h >> +++ b/include/configs/MPC8360EMDS.h >> @@ -40,13 +40,13 @@ >> * System Clock Setup >> */ >> #ifdef CONFIG_PCISLAVE >> -#define CONFIG_83XX_PCICLK 66000000 /* in HZ */ >> +#define CONFIG_83XX_PCICLK 33300000 /* in HZ */ >> #else >> -#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ >> +#define CONFIG_83XX_CLKIN 33300000 /* in Hz */ >> #endif > > Is it 33.33 MHz (as stated in the changelog) or 33.30 MHz (as > implemented here)?
Never mind, I see this was fixed in a later revision. -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
