On 10/17/2011 11:36 PM, Joachim Foerster wrote: > This driver may handle multiple PIO cores and thus needs to be > setup by calling the altera_pio_init() function within the early > board setup routine. > > The driver comes with some extras, see below the copyleft header. > > Signed-off-by: Joachim Foerster<joachim.foers...@missinglinkelectronics.com> > --- > arch/nios2/include/asm/gpio.h | 13 +- > board/altera/nios2-generic/custom_fpga.h | 1 + > board/altera/nios2-generic/nios2-generic.c | 8 + > drivers/gpio/Makefile | 1 + > drivers/gpio/altera_pio.c | 299 > ++++++++++++++++++++++++++++ > 5 files changed, 320 insertions(+), 2 deletions(-) > create mode 100644 drivers/gpio/altera_pio.c
Hi Joachim, Please fix these warning. Thanks. $ ./MAKEALL nios2-generic Configuring for nios2-generic board... altera_pio.c: In function `altera_pio_info': altera_pio.c:189: warning: ` ' flag used with `%u' printf format checkpatch.pl ERROR: do not initialise statics to 0 or NULL #209: FILE: drivers/gpio/altera_pio.c:71: +static int pio_num = 0; ERROR: do not initialise statics to 0 or NULL #217: FILE: drivers/gpio/altera_pio.c:79: +static int pio_gpio_num = 0; Otherwise, Tested-by: Thomas Chou <tho...@wytron.com.tw> Best regards, Thomas _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
