On Sat, Oct 15, 2011 at 12:42 PM, Mike Frysinger <vap...@gentoo.org> wrote:
> On Friday 14 October 2011 23:38:50 Vadim Bendebury wrote:
>> --- /dev/null
>> +++ b/drivers/tpm/generic_lpc_tpm.c
>>
>> +#define TPM_TIMEOUT_ERR (~0)
>> +#define TPM_DRIVER_ERR (-1)
>
> these are the same thing. another reason why you shouldn't mix ~ with normal
> values. use -2 or something.
>
done
>> +/* TPM access going through macros to make tracing easier. */
>> +#define tpm_read(ptr) ({ \
>> + u32 __ret; \
>> + __ret = (sizeof(*ptr) == 1) ? readb(ptr) : readl(ptr); \
>> + debug(PREFIX "Read reg 0x%x returns 0x%x\n", \
>> + (u32)ptr - (u32)lpc_tpm_dev, __ret); \
>> + __ret; })
>
> that last "__ret;" is indented way too far. it should be on the same level as
> "u32 __ret;" and such.
>
done
>> +#define tpm_write(value, ptr) ({ \
>> + u32 __v = value; \
>> + debug(PREFIX "Write reg 0x%x with 0x%x\n", \
>> + (u32)ptr - (u32)lpc_tpm_dev, __v); \
>> + if (sizeof(*ptr) == 1) \
>> + writeb(__v, ptr); \
>> + else \
>> + writel(__v, ptr); })
>
> ({...}) doesn't make sense here. this should be a do{...}while(0).
>
done
[..]
cheers,
/vb
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
