I'm considering using SPL instead of x-load for an upcoming omap project. To begin learning about SPL I tried building and running SPL for pandaboard using v2011.09.
With my initial build I got the following output: U-Boot SPL 2011.09 (Oct 11 2011 - 10:18:27) Texas Instruments OMAP4430 ES2.0 SDRAM: identified size not same as expected size identified: 4 expected: 20000000 MMC Device 0 not found spl: mmc device not found!! ### ERROR ### Please RESET the board ### Searching the list to see if others were having trouble, I found this patch and applied it: [U-Boot] [PATCH] omap: spl: fix build break due to changes in FAT This eliminated the MMC error, but spl still seems broken: U-Boot SPL 2011.09 (Oct 11 2011 - 13:42:38) Texas Instruments OMAP4430 ES2.0 SDRAM: identified size not same as expected size identified: 4 expected: 40000000 ����: 738198048, Has anyone else been able to successfully use SPL on pandaboard with v2011.09? Steve _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
