Enable support for SERIAL_MULTI.
Microblaze can use uart16550 and uartlite drivers.
Signed-off-by: Michal Simek <mon...@monstr.eu>
---
Note:
Follow serial.h conding style.
---
arch/microblaze/lib/board.c | 4 ++++
include/configs/microblaze-generic.h | 2 ++
include/serial.h | 2 +-
3 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c
index ca5882d..64089c8 100644
--- a/arch/microblaze/lib/board.c
+++ b/arch/microblaze/lib/board.c
@@ -32,6 +32,7 @@
#include <stdio_dev.h>
#include <net.h>
#include <asm/processor.h>
+#include <serial.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -110,6 +111,9 @@ void board_init (void)
monitor_flash_len = __end - __text_start;
+#ifdef CONFIG_SERIAL_MULTI
+ serial_initialize();
+#endif
/*
* The Malloc area is immediately below the monitor copy in DRAM
* aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off
diff --git a/include/configs/microblaze-generic.h
b/include/configs/microblaze-generic.h
index 6b3fd76..89657189 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -31,6 +31,8 @@
#define CONFIG_MICROBLAZE 1
#define MICROBLAZE_V5 1
+#define CONFIG_SERIAL_MULTI 1
+
/* uart */
#ifdef XILINX_UARTLITE_BASEADDR
# define CONFIG_XILINX_UARTLITE
diff --git a/include/serial.h b/include/serial.h
index 5926244..f047d2f 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -31,7 +31,7 @@ extern struct serial_device * default_serial_console (void);
defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \
defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \
defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \
- defined(CONFIG_TEGRA2)
+ defined(CONFIG_TEGRA2) || defined(CONFIG_MICROBLAZE)
extern struct serial_device serial0_device;
extern struct serial_device serial1_device;
#if defined(CONFIG_SYS_NS16550_SERIAL)
--
1.7.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
