Dear "Ira W. Snyder", In message <1317159046-11886-3-git-send-email-...@ovro.caltech.edu> you wrote: > This adds support for the Freescale COM Express P2020 board. This board > is similar to the P1_P2_RDB, but has some extra (as well as missing) > peripherals. > > Unlike all other mpc85xx boards, it uses a watchdog timeout to reset. > Using the HRESET_REQ register does not work. > > Signed-off-by: Ira W. Snyder <i...@ovro.caltech.edu> > --- > arch/powerpc/include/asm/immap_85xx.h | 1 + > board/freescale/p2020come/Makefile | 53 +++ > board/freescale/p2020come/ddr.c | 245 +++++++++++++ > board/freescale/p2020come/law.c | 36 ++ > board/freescale/p2020come/p2020come.c | 393 ++++++++++++++++++++ > board/freescale/p2020come/pci.c | 43 +++ > board/freescale/p2020come/tlb.c | 91 +++++ > boards.cfg | 3 + > include/configs/P2020COME.h | 638 > +++++++++++++++++++++++++++++++++ > 9 files changed, 1503 insertions(+), 0 deletions(-) > create mode 100644 board/freescale/p2020come/Makefile > create mode 100644 board/freescale/p2020come/ddr.c > create mode 100644 board/freescale/p2020come/law.c > create mode 100644 board/freescale/p2020come/p2020come.c > create mode 100644 board/freescale/p2020come/pci.c > create mode 100644 board/freescale/p2020come/tlb.c > create mode 100644 include/configs/P2020COME.h
Checkpatch says: total: 6 errors, 23 warnings, 1515 lines checked Please clean up and resubmit. Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de This all sounds complicated, but it mostly does excatly what you ex- pect. It's just difficult for us to explain what you expect... - L. Wall & R. L. Schwartz, _Programming Perl_ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot