On Tuesday, September 27, 2011 02:22:18 PM Fabio Estevam wrote: > Hi Marek, > > On Tue, Sep 27, 2011 at 9:09 AM, Marek Vasut <marek.va...@gmail.com> wrote: > > Signed-off-by: Marek Vasut <marek.va...@gmail.com> > > Cc: Stefano Babic <sba...@denx.de> > > --- > > drivers/video/mxc_ipuv3_fb.c | 14 ++++++++++++-- > > 1 files changed, 12 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c > > index a66981c..c4443e8 100644 > > --- a/drivers/video/mxc_ipuv3_fb.c > > +++ b/drivers/video/mxc_ipuv3_fb.c > > @@ -42,6 +42,16 @@ > > > > DECLARE_GLOBAL_DATA_PTR; > > > > +/* Use DISP #1 by default. */ > > +#ifndef CONFIG_VIDEO_MX5_OUTPUT > > +#define CONFIG_VIDEO_MX5_OUTPUT 0 > > +#endif > > What about putting a define for selecting between IPU DI0 or DI1 in > the board config file? > > There are boards that have DI0 connected as the primary display, > others may have DI1. > > This way the mxc_ipuv3_fb.c driver could handle both cases depending > on the board config.
Sure, this is a default value for boards which just use the default (most common case). You can define CONFIG... in your board config file and change this. > > Regards, > > Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
