Thanks for the reply.
I was in the process updating ELDK from 4.1 to 4.2 and must have had
something screwed up. I tried again Today and it compiles without error.
Thanks for looking into this and helping a newbie.
Brian
On 9/24/2011 3:05 AM, Anatolij Gustschin wrote:
Hi,
On Fri, 23 Sep 2011 18:11:28 -0700
"Brian S. Park"<brian.p...@corelis.com> wrote:
Hi,
I'm currently working on updating the firmware on our custom board
(based on IBM walnut board) and tried to build the latest released
u-boot 2011.06 using ELDK4.2.
Using the fresh source code extracted from u-boot-2011.06.tar.bz2, I
did "make walnut_config" and then "make". But I get the following error.
ppc_4xx-ld:u-boot.lds:1: parse error
make: *** [u-boot] Error 1
All of the code compiles. I think it's a linker error but I have no idea
how to resolve the problem.
Any help would be appreciated.
$ wget -c ftp://ftp.denx.de/pub/u-boot/u-boot-2011.06.tar.bz2
$ tar xf u-boot-2011.06.tar.bz2
$ cd u-boot-2011.06/
$ export CROSS_COMPILE=ppc_4xx-
$ ./MAKEALL walnut
Configuring for walnut board...
text data bss dec hex filename
219550 19468 42544 281562 44bda ./u-boot
--------------------- SUMMARY ----------------------------
Boards compiled: 1
----------------------------------------------------------
There is no such problem with walnut board in the v2011.06 release.
Please double-check our source.
HTH,
Anatolij
--
*Boundary-scan with limited budget, insufficient resources, or tight
schedules? Try TestGenie!
<http://www.corelis.com/products-JTAG/TestGenie-Boundary-Scan.htm>*
*Need a JTAG Refresher? Sign Up for a Free Boundary-Scan Training Class
Today!
<http://www.corelis.com/education/JTAG_Boundary-Scan_Seminars_and_Training.htm>*
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
