From: Shaohui Xie <shaohui....@freescale.com>
According to CPLD 2.2, the default configuration is changed, so updated the
description of CPLD command, otherwise it will confusing.
Signed-off-by: Shaohui Xie <shaohui....@freescale.com>
Signed-off-by: Kumar Gala <ga...@kernel.crashing.org>
---
board/freescale/p2041rdb/cpld.c | 16 ++++++++--------
1 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/board/freescale/p2041rdb/cpld.c b/board/freescale/p2041rdb/cpld.c
index 37b0ed5..2ad89a8 100644
--- a/board/freescale/p2041rdb/cpld.c
+++ b/board/freescale/p2041rdb/cpld.c
@@ -159,14 +159,14 @@ U_BOOT_CMD(
"cpld_cmd watchdog <watchdog_period> - set the watchdog period\n"
" period: 1ms 10ms 30ms 100ms 1s 10s 60s disable\n"
"cpld_cmd lane_mux <lane> <mux_value> - set multiplexed lane pin\n"
- " lane 6: 0 -> slot1 (Default)\n"
- " 1 -> SGMII\n"
- " lane a: 0 -> slot2 (Default)\n"
- " 1 -> AURORA\n"
- " lane c: 0 -> slot2 (Default)\n"
- " 1 -> SATA0\n"
- " lane d: 0 -> slot2 (Default)\n"
- " 1 -> SATA1\n"
+ " lane 6: 0 -> slot1\n"
+ " 1 -> SGMII (Default)\n"
+ " lane a: 0 -> slot2\n"
+ " 1 -> AURORA (Default)\n"
+ " lane c: 0 -> slot2\n"
+ " 1 -> SATA0 (Default)\n"
+ " lane d: 0 -> slot2\n"
+ " 1 -> SATA1 (Default)\n"
#ifdef DEBUG
"cpld_cmd dump - display the CPLD registers\n"
#endif
--
1.7.3.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
