Hi, has anyone noticed the problem with dataflash write support on these two platforms. I'm using at91sam9g20ek_dataflash_cs1 and at91sam9260ek_dataflash_cs1 config on my test EK platforms. When I try to add or modify environment variables and then save them with "saveenv" everything seems OK but nothing actually gets written.
U-Boot 2011.09-rc1-00020-g56fa45d-dirty (Sep 22 2011 - 12:58:48) CPU: AT91SAM9G20 Crystal frequency: 18.432 MHz CPU clock : 396.288 MHz Master clock : 132.096 MHz DRAM: 64 MiB WARNING: Caches not enabled NAND: 512 MiB DataFlash:AT45DB161 Nb pages: 4096 Page Size: 528 Size= 2162688 bytes Logical address: 0xD0000000 Area 0: D0000000 to D00041FF Bootstrap Area 1: D0004200 to D00083FF Environment Area 2: D0008400 to D0041FFF U-Boot *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: macb0Warning: failed to set MAC address Regards, David _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
