Hi Michael and Stefan, Le 19/09/2011 20:40, Michael Schwingen a écrit : > Am 09/17/2011 10:12 AM, schrieb Albert ARIBAUD: >> (board maintainers in CC:) >> >> Hi all, >> >> There remains 13 boards listed as having warnings or errors at this >> point in a ./MAKEALL arm: >> >> --------------------- SUMMARY ---------------------------- >> Boards compiled: 242 >> Boards with warnings or errors: 13 ( omap3_beagle actux1_4_16 >> actux1_8_16 actux1_4_32 actux1_8_32 actux2 actux3 actux4 dvlhost >> ixdp425 ixdpg425 pdnb3 scpu ) >> ---------------------------------------------------------- >> >> Of these, >> >> 1. omap3_beagle has a 'simple' warning "beagle.c:532: warning: >> initialization from incompatible pointer type". Dirk, can you look >> into it? >> >> 2. ixdp425 is marked "orphaned". Stefan, I am wild-guessing that >> ixdp425 might be acquainted to the ixdpg425 that you maintain. Do you >> want to take ixdp425? If not, we should drop it. > I do have one of these @work, but rarely take it out of the closet. I > can run tests if required. but I am not sure if it is worth the effort > to keep it.
Since you concur with Stefan, I will drop it. > OTOH, ixdgp425 seems to be an almost exact clone of the ixdp425, with > different PCB layout, so ditching one and keeping the other makes not > much sense IMHO. Stefan, would you agree about removing ixdpg425 as well? >> 3. All others have the same issue, namely "arm-linux-ld: stubs.o: >> compiled for a big endian system and target is little endian". Seems >> for this one, I am not using the right toolchain or at least the right >> libs. Can one of the maintainers let me know how exactly they build >> their boards? > Just tried actux3 - I get only this one warning: > > /usr/local/pkg/x-tools/armeb-unknown-linux-gnu/bin/.armeb-unknown-linux-gnu-ld: > warning: creating a DT_TEXTREL in object. > > AFAIK, that one has been there since relocation was added. > > I compile using >> export > CROSS_COMPILE=/opt/x-tools/armeb-unknown-linux-gnu/bin/armeb-unknown-linux-gnu- >> make > > /opt/x-tools/armeb-unknown-linux-gnu/bin/armeb-unknown-linux-gnu-gcc -v Microcross X tools -- no free version apparently... > gcc version 4.3.4 (crosstool-NG-hg_default@1471_4a88cb9bfe8f) ... but it seems like it is a standard crosstool ng build. Guess I'll have to build my own if I want to be able to .MAKEALL these boards... Thanks for the info. > cu > Michael Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
