On Fri, Sep 16, 2011 at 1:14 AM, Simon Schwarz <simonschwarz...@googlemail.com> wrote: > Hi Joel, > > The current release (based on u-boot-ti) is V9: > http://patchwork.ozlabs.org/bundle/Simon/OMAP3_SPL_V9/ > > Or V10 > http://mid.gmane.org/1315949258-12064-1-git-send-email-tr...@ti.com > (based on u-boot-arm) > > Actually this may already work (although I haven't tested it yet). If > you define CONFIG_SPL_MMC_SUPPORT and CONFIG_SPL_NAND_SUPPORT (plus the > necessary defines for them) in your board header it is looking for the > bootdevice the ROM code used and tries to load the image from it. > > If you try MMC with OMAP3 I would appreciate a message if it works or not.
I've managed to port over to omap3evm and beagleboard (both xM and rev C) and boot from MMC. I haven't yet gotten NAND happy on omap3evm and will be attempting NAND on beagleboard rev C soon. And I'll post a full patch series once things work a bit more (as I've told Simon privately I had to rework the memory init hook a bit). -- Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
