> > > > > >> > >> On Thu, Aug 25, 2011 at 7:46 AM, Balaji T K <balaj...@ti.com> wrote: > >> > Enable high capacity to host capability. > >> > Fixes eMMC detection on boot from MMC/SD card. > >> > > >> > Signed-off-by: Balaji T K <balaj...@ti.com> > >> > Signed-off-by: Aneesh V <ane...@ti.com> > >> > --- > >> > drivers/mmc/omap_hsmmc.c | 3 ++- > >> > 1 files changed, 2 insertions(+), 1 deletions(-) > >> > > >> > diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c > >> > index ef12ecd..6627905 100644 > >> > --- a/drivers/mmc/omap_hsmmc.c > >> > +++ b/drivers/mmc/omap_hsmmc.c > >> > @@ -461,7 +461,8 @@ int omap_mmc_init(int dev_index) > >> > return 1; > >> > } > >> > mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | > MMC_VDD_165_195; > >> > - mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | > >> MMC_MODE_HS; > >> > + mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | > MMC_MODE_HS > >> | > >> > + MMC_MODE_HC; > >> > > >> > mmc->f_min = 400000; > >> > mmc->f_max = 52000000; > >> > -- > >> > >> I tested a similar patch on a Tegra2 system, so: > >> > >> Acked-by: Simon Glass <s...@chromium.org> > >> > > > > If it is OK with Andy, I can apply this to u-boot-ti. > > > > --Sandeep > > > Hi Andy, > > I tested this on OMAP3 beagle board with 512MB and 4GB card. > mmc read and write is OK. Can you pull this patch ?
Or please give an ACK, so that I can pull it into u-boot-ti. --Sandeep _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
