On Wed, Sep 14, 2011 at 2:52 PM, Paulraj, Sandeep <s-paul...@ti.com> wrote: > > >> On Tue, Aug 16, 2011 at 5:17 PM, Joe Hershberger <joe.hershber...@ni.com> >> wrote: >> > Add a shim driver to drivers/gpio that maps the standard GPIO API to the >> OMAP GPIO API >> > Empty gpio.h is needed in the asm/arch dirs for omap3 and omap4 due to >> include in asm/gpio.h >> > >> > Signed-off-by: Joe Hershberger <joe.hershber...@ni.com> >> > Cc: Joe Hershberger <joe.hershber...@gmail.com> >> > Cc: Sandeep Paulraj <s-paul...@ti.com> >> > --- >> > Changes for v2: >> > - Changed API to match common gpio API >> (http://patchwork.ozlabs.org/patch/109904/) >> > >> > arch/arm/include/asm/arch-omap3/gpio.h | 1 + >> > arch/arm/include/asm/arch-omap4/gpio.h | 1 + >> > drivers/gpio/Makefile | 1 + >> > drivers/gpio/omap_gpio.c | 64 >> ++++++++++++++++++++++++++++++++ >> > 4 files changed, 67 insertions(+), 0 deletions(-) >> > create mode 100644 arch/arm/include/asm/arch-omap3/gpio.h >> > create mode 100644 arch/arm/include/asm/arch-omap4/gpio.h >> > create mode 100644 drivers/gpio/omap_gpio.c >> >> Any word on this patch? > > > The OMAP GPIO driver was updated recently. > > http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=81bdc155c72ef9e093b388b90c58d8134d870976 > > http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=3b690ebbbf21303a3bac1f62d967c36cd8655ce0 > > http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=84c3b6312997de6f98114263159c8b9824f3d33d > > --Sandeep >
Sounds good... I'll port my Panda Board support to use the common API. -Joe _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
