[U-Boot] [PATCH 09/11] FEC: Add timeout for chip reset

[Marek Vasut]

Signed-off-by: Marek Vasut <marek.va...@gmail.com>
Cc: Ben Warren <biggerbadder...@gmail.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Wolfgang Denk <w...@denx.de>
Cc: Detlev Zundel <d...@denx.de>
---
 drivers/net/fec_mxc.c |   25 +++++++++++++++++++++----
 1 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 3aaec37..6355640 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -695,18 +695,22 @@ static int fec_probe(bd_t *bd, int dev_id, int phy_id, 
uint32_t base_addr)
        struct eth_device *edev;
        struct fec_priv *fec;
        unsigned char ethaddr[6];
+       uint32_t start;
+       int ret = 0;
 
        /* create and fill edev struct */
        edev = (struct eth_device *)malloc(sizeof(struct eth_device));
        if (!edev) {
                puts("fec_mxc: not enough malloc memory for eth_device\n");
-               return -ENOMEM;
+               ret = -ENOMEM;
+               goto err1;
        }
 
        fec = (struct fec_priv *)malloc(sizeof(struct fec_priv));
        if (!fec) {
                puts("fec_mxc: not enough malloc memory for fec_priv\n");
-               return -ENOMEM;
+               ret = -ENOMEM;
+               goto err2;
        }
 
        memset(edev, 0, sizeof(*edev));
@@ -726,8 +730,14 @@ static int fec_probe(bd_t *bd, int dev_id, int phy_id, 
uint32_t base_addr)
 
        /* Reset chip. */
        writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_RESET, &fec->eth->ecntrl);
-       while (readl(&fec->eth->ecntrl) & FEC_ECNTRL_RESET)
+       start = get_timer(0);
+       while (readl(&fec->eth->ecntrl) & FEC_ECNTRL_RESET) {
+               if (get_timer(start) > (CONFIG_SYS_HZ * 5)) {
+                       printf("FEC MXC: Timeout reseting chip\n");
+                       goto err3;
+               }
                udelay(10);
+       }
 
        /*
         * Set interrupt mask register
@@ -767,7 +777,14 @@ static int fec_probe(bd_t *bd, int dev_id, int phy_id, 
uint32_t base_addr)
                memcpy(edev->enetaddr, ethaddr, 6);
        }
 
-       return 0;
+       return ret;
+
+err3:
+       free(fec);
+err2:
+       free(edev);
+err1:
+       return ret;
 }
 
 #ifndef        CONFIG_FEC_MXC_MULTI
-- 
1.7.5.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot