This was done with the following command-line:
for file in `find . | grep '\.[chS]$'`;
do perl -i -pe 's/(green|yellow|red|blue)_LED_(on|off)/$1_led_$2/g' $file;
done
Signed-off-by: Jason Kridner <j...@ti.com>
---
arch/arm/cpu/arm1176/start.S | 2 +-
arch/arm/cpu/arm720t/start.S | 2 +-
arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S | 10 +++++-----
arch/arm/cpu/arm920t/start.S | 2 +-
arch/arm/cpu/arm925t/start.S | 2 +-
arch/arm/cpu/arm926ejs/start.S | 2 +-
arch/arm/cpu/arm_intcm/start.S | 2 +-
arch/arm/cpu/ixp/start.S | 2 +-
arch/arm/cpu/s3c44b0/start.S | 2 +-
9 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index 0aa613d..848144a 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -358,7 +358,7 @@ clbss_l:str r2, [r0] /* clear loop...
*/
#ifndef CONFIG_NAND_SPL
bl coloured_LED_init
- bl red_LED_on
+ bl red_led_on
#endif
#endif
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index 00fa8c9..540e3c2 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -234,7 +234,7 @@ clbss_l:str r2, [r0] /* clear loop...
*/
bne clbss_l
bl coloured_LED_init
- bl red_LED_on
+ bl red_led_on
#endif
/*
diff --git a/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
b/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
index a20ec89..f21e237 100644
--- a/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
+++ b/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
@@ -34,8 +34,8 @@ lowlevel_init:
str lr, [r1]
/* Turn on both LEDs */
- bl red_LED_on
- bl green_LED_on
+ bl red_led_on
+ bl green_led_on
/* Configure flash wait states before we switch to the PLL */
bl flash_cfg
@@ -44,14 +44,14 @@ lowlevel_init:
bl pll_cfg
/* Turn off the Green LED and leave the Red LED on */
- bl green_LED_off
+ bl green_led_off
/* Setup SDRAM */
bl sdram_cfg
/* Turn on Green LED, Turn off the Red LED */
- bl green_LED_on
- bl red_LED_off
+ bl green_led_on
+ bl red_led_off
/* FIXME: we use async mode for now */
mrc p15, 0, r0, c1, c0, 0
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index c308420..8c5612c 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -277,7 +277,7 @@ clbss_l:str r2, [r0] /* clear loop...
*/
bne clbss_l
bl coloured_LED_init
- bl red_LED_on
+ bl red_led_on
#endif
/*
diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S
index 17cf5dc..dbb93ef 100644
--- a/arch/arm/cpu/arm925t/start.S
+++ b/arch/arm/cpu/arm925t/start.S
@@ -271,7 +271,7 @@ clbss_l:str r2, [r0] /* clear loop...
*/
bne clbss_l
bl coloured_LED_init
- bl red_LED_on
+ bl red_led_on
#endif
/*
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 16e35c2..d164d6d 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -270,7 +270,7 @@ clbss_l:str r2, [r0] /* clear loop...
*/
bne clbss_l
bl coloured_LED_init
- bl red_LED_on
+ bl red_led_on
#endif
/*
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index ba96208..2033b36 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -238,7 +238,7 @@ clbss_l:str r2, [r0] /* clear loop...
*/
bne clbss_l
bl coloured_LED_init
- bl red_LED_on
+ bl red_led_on
#endif
/*
diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index b17d267..cb32121 100644
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -340,7 +340,7 @@ clbss_l:str r2, [r0] /* clear loop...
*/
bne clbss_l
bl coloured_LED_init
- bl red_LED_on
+ bl red_led_on
#endif
/*
diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S
index 2545cf6..a29d5b4 100644
--- a/arch/arm/cpu/s3c44b0/start.S
+++ b/arch/arm/cpu/s3c44b0/start.S
@@ -223,7 +223,7 @@ clbss_l:str r2, [r0] /* clear loop...
*/
bne clbss_l
bl coloured_LED_init
- bl red_LED_on
+ bl red_led_on
#endif
/*
--
1.7.4.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
