For some controller it has dynamic clock gating, and only toggle out clk when the first cmd0 send out, while some card strictly obey the 74 clocks rule, the interval may not be sufficient between the cmd0 and this cmd8, retry to fulfil the clock requirement.
Signed-off-by: Lei Wen <lei...@marvell.com> --- drivers/mmc/mmc.c | 16 ++++++++++++++-- 1 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 7e703c0..f9b2223 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1178,7 +1178,7 @@ block_dev_desc_t *mmc_get_dev(int dev) int mmc_init(struct mmc *mmc) { - int err; + int err, retry = 3; if (mmc->has_init) return 0; @@ -1201,7 +1201,19 @@ int mmc_init(struct mmc *mmc) mmc->part_num = 0; /* Test for SD version 2 */ - err = mmc_send_if_cond(mmc); + /* + * retry here for 3 times, as for some controller it has dynamic + * clock gating, and only toggle out clk when the first cmd0 send + * out, while some card strictly obey the 74 clocks rule, the interval + * may not be sufficient between the cmd0 and this cmd8, retry to + * fulfil the clock requirement + */ + do { + err = mmc_send_if_cond(mmc); + } while (--retry > 0 && err); + + if (err) + return err; /* Now try to get the SD card's operating condition */ err = sd_send_op_cond(mmc); -- 1.7.0.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot