Avoid the usage of extern in C file as pointed out by checkpatch.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
Changes since v2:
- Place the extern in the MX25 imx-regs.h instead of inside the MX27 imx-regs.h
Changes since v1:
- No changes
arch/arm/include/asm/arch-mx25/imx-regs.h | 1 +
board/karo/tx25/tx25.c | 1 -
2 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h
b/arch/arm/include/asm/arch-mx25/imx-regs.h
index 9e30f7c..7e34050 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -37,6 +37,7 @@
#ifdef CONFIG_FEC_MXC
extern void mx25_fec_init_pins(void);
extern void imx_get_mac_from_fuse(unsigned char *mac);
+extern void mx25_uart1_init_pins(void);
#endif
/* Clock Control Module (CCM) registers */
diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c
index 25b99e8..2787715 100644
--- a/board/karo/tx25/tx25.c
+++ b/board/karo/tx25/tx25.c
@@ -141,7 +141,6 @@ void tx25_fec_init(void)
int board_init()
{
#ifdef CONFIG_MXC_UART
- extern void mx25_uart1_init_pins(void);
mx25_uart1_init_pins();
#endif
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
