When storing u-boot environment variables on a NOR flash using multiple
sectors, the following error occurs when writing changes using
fw_setenv.
/etc # cat fw_env.config
/dev/mtd12 0x0000 0x20000 0x10000 2
/etc # fw_setenv test test
End of range reached, aborting
Error: can't write fw_env to flash
The reason for the error is that although both sectors are written in
one pass, the loop for the write is executed twice because the
"processed" variable is incremented by the incorrect amount.
Signed-off-by: Yiyang Fei <yiyang....@barco.com>
---
tools/env/fw_env.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index ed6b53f..e6b2cae 100644
--- a/tools/env/fw_env.c
+++ b/tools/env/fw_env.c
@@ -880,9 +880,8 @@ static int flash_write_buf (int dev, int fd, void
*buf, size_t count,
ioctl (fd, MEMLOCK, &erase);
- processed += blocklen;
- block_seek = 0;
- blockstart += blocklen;
+ processed += erasesize;
+ blockstart += erasesize;
}
if (write_total > count)
--
1.7.2.5
DISCLAIMER:
Unless indicated otherwise, the information contained in this message is
privileged and confidential, and is intended only for the use of the
addressee(s) named above and others who have been specifically authorized
to receive it. If you are not the intended recipient, you are hereby
notified that any dissemination, distribution or copying of this message
and/or attachments is strictly prohibited. The company accepts no
liability for any damage caused by any virus transmitted by this email.
Furthermore, the company does not warrant a proper and complete
transmission of this information, nor does it accept liability for any
delays. If you have received this message in error, please contact the
sender and delete the message. Thank you.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
