Every emaclite instance use own setting.
Signed-off-by: Michal Simek <mon...@monstr.eu>
---
drivers/net/xilinx_emaclite.c | 39 +++++++++++++++++++++++----------------
1 files changed, 23 insertions(+), 16 deletions(-)
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index d71b3a5..b157c7f 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -63,12 +63,10 @@
/* Recv interrupt enable bit */
#define XEL_RSR_RECV_IE_MASK 0x00000008UL
-typedef struct {
+struct xemaclite {
u32 nexttxbuffertouse; /* Next TX buffer to write to */
u32 nextrxbuffertouse; /* Next RX buffer to read from */
-} xemaclite;
-
-static xemaclite emaclite;
+};
static u32 etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
@@ -134,7 +132,6 @@ static void emaclite_halt(struct eth_device *dev)
static int emaclite_init(struct eth_device *dev, bd_t *bis)
{
debug ("EmacLite Initialization Started\n");
- memset (&emaclite, 0, sizeof (xemaclite));
/*
* TX - TX_PING & TX_PONG initialization
@@ -178,22 +175,24 @@ static int emaclite_init(struct eth_device *dev, bd_t
*bis)
return 0;
}
-static int xemaclite_txbufferavailable (xemaclite *instanceptr)
+static int xemaclite_txbufferavailable (struct eth_device *dev)
{
u32 reg;
u32 txpingbusy;
u32 txpongbusy;
+ struct xemaclite *emaclite = dev->priv;
+
/*
* Read the other buffer register
* and determine if the other buffer is available
*/
- reg = in_be32 (instanceptr->baseaddress +
- instanceptr->nexttxbuffertouse + 0);
+ reg = in_be32 (dev->iobase +
+ emaclite->nexttxbuffertouse + 0);
txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
XEL_TSR_XMIT_BUSY_MASK);
- reg = in_be32 (instanceptr->baseaddress +
- (instanceptr->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0);
+ reg = in_be32 (dev->iobase +
+ (emaclite->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0);
txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
XEL_TSR_XMIT_BUSY_MASK);
@@ -204,13 +203,14 @@ static int emaclite_send (struct eth_device *dev,
volatile void *ptr, int len)
{
u32 reg;
u32 baseaddress;
+ struct xemaclite *emaclite = dev->priv;
u32 maxtry = 1000;
if (len > ENET_MAX_MTU)
len = ENET_MAX_MTU;
- while (!xemaclite_txbufferavailable (&emaclite) && maxtry) {
+ while (!xemaclite_txbufferavailable(dev) && maxtry) {
udelay (10);
maxtry--;
}
@@ -227,7 +227,7 @@ static int emaclite_send (struct eth_device *dev, volatile
void *ptr, int len)
}
/* Determine the expected TX buffer address */
- baseaddress = (dev->iobase + emaclite.nexttxbuffertouse);
+ baseaddress = (dev->iobase + emaclite->nexttxbuffertouse);
/* Determine if the expected buffer address is empty */
reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
@@ -236,7 +236,7 @@ static int emaclite_send (struct eth_device *dev, volatile
void *ptr, int len)
& XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
- emaclite.nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
+ emaclite->nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
#endif
debug ("Send packet from 0x%x\n", baseaddress);
/* Write the frame to the buffer */
@@ -282,13 +282,14 @@ static int emaclite_recv(struct eth_device *dev)
u32 length;
u32 reg;
u32 baseaddress;
+ struct xemaclite *emaclite = dev->priv;
- baseaddress = dev->iobase + emaclite.nextrxbuffertouse;
+ baseaddress = dev->iobase + emaclite->nextrxbuffertouse;
reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
debug ("Testing data at address 0x%x\n", baseaddress);
if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
#ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
- emaclite.nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
+ emaclite->nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
#endif
} else {
#ifndef CONFIG_XILINX_EMACLITE_RX_PING_PONG
@@ -341,15 +342,21 @@ static int emaclite_recv(struct eth_device *dev)
int xilinx_emaclite_initialize (bd_t *bis, int base_addr)
{
struct eth_device *dev;
+ struct xemaclite *emaclite;
dev = calloc(1, sizeof(*dev));
if (dev == NULL)
return -1;
+ emaclite = calloc(1, sizeof(struct xemaclite));
+ if (emaclite == NULL)
+ return -1;
+
+ dev->priv = emaclite;
+
sprintf(dev->name, "Xelite.%x", base_addr);
dev->iobase = base_addr;
- dev->priv = 0;
dev->init = emaclite_init;
dev->halt = emaclite_halt;
dev->send = emaclite_send;
--
1.5.5.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
