Dear Albert ARIBAUD, In message <4e54b862.2070...@aribaud.net> you wrote: > > Well, it is more a question of which toolchain(s) we want supported in > U-Boot. Denx ELDK is one of them I guess :) but now that ELDK 5.0 is > out, I don't know if ELDK 4.2 support is still required.
It seems reasonable to support any gcc 4.x configuration. > If ELDK4.2 must be supported, then I would suggest creating a > configuration option to allow the use of armv7-a ISA, then the > arch/arm/cpu/armv7/highbank/config.mk file would select armv7-a ISA I don't tink I want to accept a board specific config.mk for such apurpose. We want to get rid of thse config.mk files. Either ARMv7 based boards all need this option, or they all don;t need it. Thisis NOT a board specific feature. > If ELDK4.2 support is dropped (at least partially) then no change would > be needed. > > Wolfgang:, I think that toolchain support for ARM is more your choice > than mine. See above - I see no reason why we should abandon ELDK 4.2 when adding a new board - when all other boards with similar CPUs work just fine. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de They say a little knowledge is a dangerous thing, but it is not one half so bad as a lot of ignorance. - Terry Pratchett, _Equal Rites_ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
