Hello, I am currently designing an mpc8315e board with u-boot based on the mpc8315e-rdb board (u-boot v2011.06). One pci-e target is connected to pcie0 interface (mSATA SSD module), however during mpc83xx_pcie_init_bus call the pcie0 link returns always a "no link" information.
It looks like the mpc8315e-rdb code didn't include the serdes configuration has it's done on the mpc8308-rdb board, why such setting aren't present into mpc8315e-rdb? Is the pci-e interface working on such board with the reset default configuration on serdes section? Is someone has successful experience about the pcie0 interface with the mpc8315-erdb? Thanks for your support, Best regards Guy Yribarren _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
