Hi Matt, We are in a process of developing a SoC around cortex a9 quad core versatile express. For that we made changes in the U-Boot. Is there any way (like any simulator/emulator which supports this board) to validate the changes before getting the arm board itself.
Any kind of help is highly appreciated. -- Thanks and Regards, Sandeep Kumar On Sun, 2011-08-21 at 22:17 -0600, Matt Waddel wrote: > Hi Sandeep, > > On 08/21/2011 12:37 AM, Sandeep Kumar wrote: > > Hi all, > > > > I am trying to use U-Boot for cortex A9 quad core versatile express board. > > I saw that the support is already added > > for that board but i am not able to find out the DDR initialization code > > anywhere before using the stack. In fact i didn't find the DDR > > initialization code anywhere for this board. This board also comes along > > with a CLCD (color LCD) controller which is also not initialized > > anywhere for this board. Is the support for this board is tested as > > without initializing the DDR how the code relocation and execution from > > DDR is possible. > > Sorry for not responding sooner. > > Currently the DDR setup is handled by the ARM boot monitor code > and u-boot runs as the 2nd stage bootloader. So DDR setup is > not done in u-boot. > > Also, the CLCD is not setup in u-boot. > > --Matt > > > > > Any kind of pointers will be very helpful. > > > > > > > > > > _______________________________________________ > > U-Boot mailing list > > U-Boot@lists.denx.de > > http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
