On Wed, Jul 15, 2026 at 05:04:04PM +0200, Michael Opdenacker wrote: > Add that the "BOOT" button must be used > to switch the board to fastboot mode. > > Signed-off-by: Michael Opdenacker <[email protected]> > --- > doc/board/thead/lpi4a.rst | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/doc/board/thead/lpi4a.rst b/doc/board/thead/lpi4a.rst > index acd7ac2698d..3920efcd710 100644 > --- a/doc/board/thead/lpi4a.rst > +++ b/doc/board/thead/lpi4a.rst > @@ -91,8 +91,10 @@ OpenSBI firmware and proper U-Boot. > Booting > ~~~~~~~ > > -u-boot-with-spl.bin should be loaded to SRAM through fastboot. Connect > -the board to computer with Type-C cable and run > +u-boot-with-spl.bin should be loaded to SRAM through fastboot. > + > +To put the board in fastboot mode, press and hold the ``BOOT`` button, > +connect the board to the computer with a Type-C cable, release ``BOOT`` and > run: > > .. code-block:: bash > > > --- > base-commit: 8dbe57ba648648c4897717cebbc4505a8e0a8c23 > change-id: 20260715-improve-lpi4a-doc-feed8191d37c > > Best regards, > -- > Michael Opdenacker <[email protected]> >
Reviewed-by: Yao Zi <[email protected]> Thanks, this is indeed more clear. Regards, Yao Zi
