Dear Thomas Petazzoni,
> Based on earlier work by Alex Waterman <awater...@dawning.com>.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazz...@free-electrons.com>
> ---
> Makefile | 21 ---
> board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 121 +++++++++-------
> board/atmel/at91sam9m10g45ek/led.c | 6 +-
> boards.cfg | 1 +
> include/configs/at91sam9m10g45ek.h | 187
> +++++++++++------------
> 5 files changed, 160 insertions(+), 176 deletions(-)
>
First, the checkpatch complaints:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
#67: FILE: board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c:26:
+#include <asm/io.h>
--> ignore this
ERROR: "(foo*)" should be "(foo *)"
#284: FILE: board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c:291:
+ gd->ram_size = get_ram_size((void*) CONFIG_SYS_SDRAM_BASE,
WARNING: externs should be avoided in .c files
#303: FILE: board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c:347:
+extern void at91_serial_hw_init(void);
--> you need to call at91_seriald_hw_init() anyway!
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
#322: FILE: board/atmel/at91sam9m10g45ek/led.c:26:
+#include <asm/io.h>
--> ignore this
WARNING: please, no space for starting a line,
excluding comments
#498: FILE: include/configs/at91sam9m10g45ek.h:128:
+ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)$
total: 1 errors, 4 warnings, 550 lines checked
U-Boot-2-2-atmel-Update-support-of-board-AT91SAM9M10G45-EK-to-new-style.patch
has style problems, please review.
> diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
> b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
> index f92b20f..40ee345 100644
> --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
> +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
> @@ -23,17 +23,14 @@
> */
>
> #include <common.h>
> -#include <asm/sizes.h>
> -#include <asm/arch/at91sam9g45.h>
> -#include <asm/arch/at91sam9_matrix.h>
> +#include <asm/io.h>
> +#include <asm/arch/at91sam9g45_matrix.h>
> #include <asm/arch/at91sam9_smc.h>
> #include <asm/arch/at91_common.h>
> #include <asm/arch/at91_pmc.h>
> #include <asm/arch/at91_rstc.h>
> -#include <asm/arch/clk.h>
> #include <asm/arch/gpio.h>
> -#include <asm/arch/io.h>
> -#include <asm/arch/hardware.h>
> +#include <asm/arch/clk.h>
> #include <lcd.h>
> #include <atmel_lcdc.h>
> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
> @@ -49,35 +46,38 @@ DECLARE_GLOBAL_DATA_PTR;
> */
>
> #ifdef CONFIG_CMD_NAND
> -static void at91sam9m10g45ek_nand_hw_init(void)
> +void at91sam9m10g45ek_nand_hw_init(void)
> {
> + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
> + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
> + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> unsigned long csa;
>
> /* Enable CS3 */
> - csa = at91_sys_read(AT91_MATRIX_EBICSA);
> - at91_sys_write(AT91_MATRIX_EBICSA,
> - csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
> + csa = readl(&matrix->ebicsa);
> + csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
> + writel(csa, &matrix->ebicsa);
>
> /* Configure SMC CS3 for NAND/SmartMedia */
> - at91_sys_write(AT91_SMC_SETUP(3),
> - AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
> - AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
> - at91_sys_write(AT91_SMC_PULSE(3),
> - AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) |
> - AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(2));
> - at91_sys_write(AT91_SMC_CYCLE(3),
> - AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(4));
> - at91_sys_write(AT91_SMC_MODE(3),
> - AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
> - AT91_SMC_EXNWMODE_DISABLE |
> + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
> + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
> + &smc->cs[3].setup);
> + writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
> + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2),
> + &smc->cs[3].pulse);
> + writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4),
> + &smc->cs[3].cycle);
> + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
> + AT91_SMC_MODE_EXNW_DISABLE |
> #ifdef CONFIG_SYS_NAND_DBW_16
> - AT91_SMC_DBW_16 |
> + AT91_SMC_MODE_DBW_16 |
> #else /* CONFIG_SYS_NAND_DBW_8 */
> - AT91_SMC_DBW_8 |
> + AT91_SMC_MODE_DBW_8 |
> #endif
> - AT91_SMC_TDF_(3));
> + AT91_SMC_MODE_TDF_CYCLE(3),
> + &smc->cs[3].mode);
>
> - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIOC);
> + writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
>
> /* Configure RDY/BSY */
> at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
> @@ -90,7 +90,9 @@ static void at91sam9m10g45ek_nand_hw_init(void)
> #ifdef CONFIG_CMD_USB
> static void at91sam9m10g45ek_usb_hw_init(void)
> {
> - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE);
> + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> +
> + writel(1 << ATMEL_ID_PIODE, &pmc->pcer);
>
> at91_set_gpio_output(AT91_PIN_PD1, 0);
> at91_set_gpio_output(AT91_PIN_PD3, 0);
> @@ -100,47 +102,50 @@ static void at91sam9m10g45ek_usb_hw_init(void)
> #ifdef CONFIG_MACB
> static void at91sam9m10g45ek_macb_hw_init(void)
> {
> - unsigned long rstc;
> + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> + struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
> + struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
> + unsigned long erstl;
>
> /* Enable clock */
> - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_EMAC);
> + writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
>
> /*
> * Disable pull-up on:
> - * RXDV (PA15) => PHY normal mode (not Test mode)
> - * ERX0 (PA12) => PHY ADDR0
> - * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
> + * RXDV (PA15) => PHY normal mode (not Test mode)
> + * ERX0 (PA12) => PHY ADDR0
> + * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
> *
> * PHY has internal pull-down
> */
> writel(pin_to_mask(AT91_PIN_PA15) |
> pin_to_mask(AT91_PIN_PA12) |
> pin_to_mask(AT91_PIN_PA13),
> - pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
> + &pioa->pudr);
>
> - rstc = at91_sys_read(AT91_RSTC_MR);
> + erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
>
> /* Need to reset PHY -> 500ms reset */
> - at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
> - (AT91_RSTC_ERSTL & (0x0D << 8)) |
> - AT91_RSTC_URSTEN);
> + writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
> + AT91_RSTC_MR_URSTEN, &rstc->mr);
>
> - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
> + writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
>
> /* Wait for end hardware reset */
> - while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
> + while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
> + ;
>
> /* Restore NRST value */
> - at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
> - (rstc) |
> - AT91_RSTC_URSTEN);
> + writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
> + &rstc->mr);
>
> /* Re-enable pull-up */
> writel(pin_to_mask(AT91_PIN_PA15) |
> pin_to_mask(AT91_PIN_PA12) |
> pin_to_mask(AT91_PIN_PA13),
> - pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
> + &pioa->puer);
>
> + /* And the pins. */
> at91_macb_hw_init();
> }
> #endif
> @@ -161,7 +166,7 @@ vidinfo_t panel_info = {
> vl_vsync_len: 1,
> vl_upper_margin:40,
> vl_lower_margin:1,
> - mmio: AT91SAM9G45_LCDC_BASE,
> + mmio : ATMEL_BASE_LCDC,
> };
>
>
> @@ -177,6 +182,8 @@ void lcd_disable(void)
>
> static void at91sam9m10g45ek_lcd_hw_init(void)
> {
> + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> +
> at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
> at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
> at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
> @@ -208,7 +215,7 @@ static void at91sam9m10g45ek_lcd_hw_init(void)
> at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
> at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
>
> - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_LCDC);
> + writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
>
> gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE;
> }
> @@ -227,7 +234,7 @@ void lcd_show_board_info(void)
> lcd_printf ("(C) 2008 ATMEL Corp\n");
> lcd_printf ("at91supp...@atmel.com\n");
> lcd_printf ("%s CPU at %s MHz\n",
> - CONFIG_SYS_AT91_CPU_NAME,
> + ATMEL_CPU_NAME,
> strmhz(temp, get_cpu_clk_rate()));
>
> dram_size = 0;
> @@ -254,10 +261,10 @@ int board_init(void)
> #elif defined CONFIG_AT91SAM9G45EKES
> gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G45EKES;
> #endif
> +
> /* adress of boot parameters */
> - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
> + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
>
> - at91_serial_hw_init();
> #ifdef CONFIG_CMD_NAND
> at91sam9m10g45ek_nand_hw_init();
> #endif
> @@ -270,11 +277,9 @@ int board_init(void)
> #ifdef CONFIG_ATMEL_SPI
> at91_spi0_hw_init(1 << 4);
> #endif
> -
> #ifdef CONFIG_MACB
> at91sam9m10g45ek_macb_hw_init();
> #endif
> -
> #ifdef CONFIG_LCD
> at91sam9m10g45ek_lcd_hw_init();
> #endif
> @@ -283,8 +288,8 @@ int board_init(void)
>
> int dram_init(void)
> {
> - gd->bd->bi_dram[0].start = PHYS_SDRAM;
> - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
> + gd->ram_size = get_ram_size((void*) CONFIG_SYS_SDRAM_BASE,
> + CONFIG_SYS_SDRAM_SIZE);
> return 0;
> }
>
> @@ -298,7 +303,7 @@ int board_eth_init(bd_t *bis)
> {
> int rc = 0;
> #ifdef CONFIG_MACB
> - rc = macb_eth_initialize(0, (void *)AT91SAM9G45_BASE_EMAC, 0x00);
> + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
> #endif
> return rc;
> }
> @@ -338,3 +343,15 @@ void spi_cs_deactivate(struct spi_slave *slave)
> }
> }
> #endif /* CONFIG_ATMEL_SPI */
> +
> +extern void at91_serial_hw_init(void);
> +/*
> + * (re)Initialize the serial hardware.
> + */
> +int board_early_init_f(void)
> +{
> +
> + at91_serial_hw_init();
--> *seriald*
> + return 0;
> +
> +}
> diff --git a/boards.cfg b/boards.cfg
> index 38ccb8c..9dd313b 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -96,6 +96,7 @@ at91sam9rlek_dataflash arm arm926ejs
> at91sam9rlek atmel
> at91sam9xeek_nandflash arm arm926ejs at91sam9260ek
> atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
> at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek
> atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
> at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek
> atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1
> +at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek
> atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH
"m" comes before "x" - and the indentation seems off by one space
> snapper9260 arm arm926ejs -
> bluewater at91 snapper9260:AT91SAM9260
> snapper9g20 arm arm926ejs snapper9260
> bluewater at91 snapper9260:AT91SAM9G20
> cpu9260 arm arm926ejs cpu9260
> eukrea at91 cpu9260:CPU9260
> diff --git a/include/configs/at91sam9m10g45ek.h
> b/include/configs/at91sam9m10g45ek.h
> index de74dcf..384a07c 100644
> --- a/include/configs/at91sam9m10g45ek.h
> +++ b/include/configs/at91sam9m10g45ek.h
> @@ -27,48 +27,64 @@
> #ifndef __CONFIG_H
> #define __CONFIG_H
>
> +#include <asm/hardware.h>
> +
> #define CONFIG_AT91_LEGACY
> +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
>
> /* ARM asynchronous clock */
> -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal
> */
> -#define CONFIG_SYS_HZ 1000
> -
> -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
> -#ifdef CONFIG_AT91SAM9M10G45EK
> -#define CONFIG_AT91SAM9M10G45 1 /* It's an Atmel AT91SAM9M10G45
> SoC*/
> -#else
> -#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC*/
> -#endif
> +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
> +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
> +#define CONFIG_SYS_HZ 1000
> +
> +#define CONFIG_AT91SAM9M10G45EK
> +#define CONFIG_AT91FAMILY
> #define CONFIG_ARCH_CPU_INIT
> +#define CONFIG_BOARD_EARLY_INIT_F
> #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff
> */
>
> -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
> -#define CONFIG_SETUP_MEMORY_TAGS 1
> -#define CONFIG_INITRD_TAG 1
> +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_INITRD_TAG
>
> #define CONFIG_SKIP_LOWLEVEL_INIT
>
> +#define ATMEL_PIO_PORTS 5 /* 5 PIO ports. */
THAT does not belong here. It should be in at91sam9m10g45.h
> +
> /*
> * Hardware drivers
> */
> -#define CONFIG_AT91_GPIO 1
> -#define CONFIG_ATMEL_USART 1
> +#define CONFIG_AT91_GPIO
> +#define CONFIG_ATMEL_USART
> #undef CONFIG_USART0
> #undef CONFIG_USART1
> #undef CONFIG_USART2
> -#define CONFIG_USART3 1 /* USART 3 is DBGU */
> +#define CONFIG_USART3 /* USART 3 is DBGU */
Nope. This is wrong. See other 926x boards!
> +#define CONFIG_USART_BASE 0xffffee00 /* Use the DBGU hardware. */
> +#define CONFIG_USART_ID 10
OUCH. There are defines for that in at91sam9m10g45.h
> +
> +/*
> + * This needs to be defined for the OHCI code to work but it is defined as
> + * ATMEL_ID_UHPHS in the CPU specific header files.
> + */
> +#define ATMEL_ID_UHP ATMEL_ID_UHPHS
> +
> +/*
> + * Specify the clock enable bit in the PMC_SCER register.
> + */
> +#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
>
> /* LCD */
> -#define CONFIG_LCD 1
> +#define CONFIG_LCD
> #define LCD_BPP LCD_COLOR8
> -#define CONFIG_LCD_LOGO 1
> +#define CONFIG_LCD_LOGO
> #undef LCD_TEST_PATTERN
> -#define CONFIG_LCD_INFO 1
> -#define CONFIG_LCD_INFO_BELOW_LOGO 1
> -#define CONFIG_SYS_WHITE_ON_BLACK 1
> -#define CONFIG_ATMEL_LCD 1
> -#define CONFIG_ATMEL_LCD_RGB565 1
> -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
> +#define CONFIG_LCD_INFO
> +#define CONFIG_LCD_INFO_BELOW_LOGO
> +#define CONFIG_SYS_WHITE_ON_BLACK
> +#define CONFIG_ATMEL_LCD
> +#define CONFIG_ATMEL_LCD_RGB565
> +#define CONFIG_SYS_CONSOLE_IS_IN_ENV
> /* board specific(not enough SRAM) */
> #define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000
>
> @@ -82,10 +98,10 @@
> /*
> * BOOTP options
> */
> -#define CONFIG_BOOTP_BOOTFILESIZE 1
> -#define CONFIG_BOOTP_BOOTPATH 1
> -#define CONFIG_BOOTP_GATEWAY 1
> -#define CONFIG_BOOTP_HOSTNAME 1
> +#define CONFIG_BOOTP_BOOTFILESIZE
> +#define CONFIG_BOOTP_BOOTPATH
> +#define CONFIG_BOOTP_GATEWAY
> +#define CONFIG_BOOTP_HOSTNAME
>
> /*
> * Command line configuration.
> @@ -98,44 +114,29 @@
> #undef CONFIG_CMD_AUTOSCRIPT
> #undef CONFIG_CMD_LOADS
>
> -#define CONFIG_CMD_PING 1
> -#define CONFIG_CMD_DHCP 1
> -#define CONFIG_CMD_NAND 1
> -#define CONFIG_CMD_USB 1
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_NAND
> +#define CONFIG_CMD_USB
>
> /* SDRAM */
> #define CONFIG_NR_DRAM_BANKS 1
> -#define PHYS_SDRAM 0x70000000
> -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
> -
> -/* DataFlash */
> -#ifdef CONFIG_ATMEL_SPI
> -#define CONFIG_CMD_SF
> -#define CONFIG_CMD_SPI
> -#define CONFIG_SPI_FLASH 1
> -#define CONFIG_SPI_FLASH_ATMEL 1
> -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
> -#endif
> +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6
> +#define CONFIG_SYS_SDRAM_SIZE 0x08000000
>
> -/* NOR flash, if populated */
> -#ifndef CONFIG_CMD_NAND
> -#define CONFIG_SYS_NO_FLASH 1
> -#else
> -#define CONFIG_SYS_FLASH_CFI 1
> -#define CONFIG_FLASH_CFI_DRIVER 1
> -#define PHYS_FLASH_1 0x10000000
> -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
> -#define CONFIG_SYS_MAX_FLASH_SECT 256
> -#define CONFIG_SYS_MAX_FLASH_BANKS 1
> -#endif
> +#define CONFIG_SYS_INIT_SP_ADDR \
> + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
> +
> +/* No NOR flash */
> +#define CONFIG_SYS_NO_FLASH
>
> /* NAND flash */
> #ifdef CONFIG_CMD_NAND
> #define CONFIG_NAND_MAX_CHIPS 1
> #define CONFIG_NAND_ATMEL
> #define CONFIG_SYS_MAX_NAND_DEVICE 1
> -#define CONFIG_SYS_NAND_BASE 0x40000000
> -#define CONFIG_SYS_NAND_DBW_8 1
> +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
> +#define CONFIG_SYS_NAND_DBW_8
> /* our ALE is AD21 */
> #define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
> /* our CLE is AD22 */
> @@ -146,68 +147,52 @@
> #endif
>
> /* Ethernet */
> -#define CONFIG_MACB 1
> -#define CONFIG_RMII 1
> -#define CONFIG_NET_MULTI 1
> +#define CONFIG_MACB
> +#define CONFIG_RMII
> +#define CONFIG_NET_MULTI
> #define CONFIG_NET_RETRY_COUNT 20
> -#define CONFIG_RESET_PHY_R 1
> +#define CONFIG_RESET_PHY_R
>
> /* USB */
> #define CONFIG_USB_ATMEL
> -#define CONFIG_USB_OHCI_NEW 1
> -#define CONFIG_DOS_PARTITION 1
> -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
> -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /*
> AT91SAM9G45_UHP_OHCI_BASE */
> -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
> +#define CONFIG_USB_OHCI_NEW
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_SYS_USB_OHCI_CPU_INIT
> +#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_HCI
> +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
> #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
> -#define CONFIG_USB_STORAGE 1
> -
> -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address
> */
> -
> -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
> -#define CONFIG_SYS_MEMTEST_END 0x23e00000
> +#define CONFIG_USB_STORAGE
>
> -#ifdef CONFIG_SYS_USE_DATAFLASH
> +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
>
> -/* bootstrap + u-boot + env + linux in dataflash on CS0 */
> -#define CONFIG_ENV_IS_IN_SPI_FLASH 1
> -#define CONFIG_SYS_MONITOR_BASE (0xC0000000 + 0x8400)
> -#define CONFIG_ENV_OFFSET 0x4200
> -#define CONFIG_ENV_ADDR (0xC0000000 + CONFIG_ENV_OFFSET)
> -#define CONFIG_ENV_SIZE 0x4200
> -#define CONFIG_ENV_SECT_SIZE 0x10000
> -#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
> -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
> - "root=/dev/mtdblock0 " \
> - "mtdparts=atmel_nand:-(root) "\
> - "rw rootfstype=jffs2"
> +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
> +#define CONFIG_SYS_MEMTEST_END 0x23e00000
>
> -#else /* CONFIG_SYS_USE_NANDFLASH */
> -
> -/* bootstrap + u-boot + env + linux in nandflash */
> -#define CONFIG_ENV_IS_IN_NAND 1
> +/* bootstrap + u-boot + env in nandflash */
> +#define CONFIG_ENV_IS_IN_NAND
> #define CONFIG_ENV_OFFSET 0x60000
> #define CONFIG_ENV_OFFSET_REDUND 0x80000
> -#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
> -#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm"
> -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
> - "root=/dev/mtdblock5 " \
> - "mtdparts=atmel_nand:128k(bootstrap)ro, \
> - 256k(uboot)ro,128k(env1)ro,128k(env2)ro, \
> - 2M(linux),-(root) " \
> - "rw rootfstype=jffs2"
> -
> -#endif
> -
> -#define CONFIG_BAUDRATE 115200
> +#define CONFIG_ENV_SIZE 0x20000
> +
> +#define CONFIG_BOOTCOMMAND "nand read 0x70000000 0x100000 0x200000;" \
> + "bootm 0x70000000"
> +#define CONFIG_BOOTARGS
> \
> + "console=ttyS0,115200 earlyprintk " \
> + "root=/dev/mtdblock5 " \
> + "mtdparts=atmel_nand:128k(bootstrap)ro," \
> + "256k(uboot)ro,128k(env1)ro,128k(env2)ro," \
> + "2M@1M(linux),-(root) " \
> + "rw rootfstype=jffs2"
> +
> +#define CONFIG_BAUDRATE 115200
> #define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
>
> #define CONFIG_SYS_PROMPT "U-Boot> "
> #define CONFIG_SYS_CBSIZE 256
> #define CONFIG_SYS_MAXARGS 16
> #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +
> sizeof(CONFIG_SYS_PROMPT) + 16)
> -#define CONFIG_SYS_LONGHELP 1
> -#define CONFIG_CMDLINE_EDITING 1
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_CMDLINE_EDITING
> #define CONFIG_AUTO_COMPLETE
> #define CONFIG_SYS_HUSH_PARSER
> #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
Best Regards,
Reinhard
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
