Hello Andrew, Vignesh, Let me know if I can enable config options required for A53 stage in the base file since A53 SPL size is more than R5 SPL stage.
Regards, Chintan. On 02/07/26 13:42, Chintan Vankar wrote:
Enable config options required to enable Ethernet boot on SK-AM62A-LP. Signed-off-by: Chintan Vankar <[email protected]> --- configs/am62ax_evm_a53_ethboot_defconfig | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 configs/am62ax_evm_a53_ethboot_defconfig diff --git a/configs/am62ax_evm_a53_ethboot_defconfig b/configs/am62ax_evm_a53_ethboot_defconfig new file mode 100644 index 00000000000..a64542315fe --- /dev/null +++ b/configs/am62ax_evm_a53_ethboot_defconfig @@ -0,0 +1,16 @@ +#include <configs/am62ax_evm_a53_defconfig> + +CONFIG_ARM=y +CONFIG_ARCH_K3=y +CONFIG_SOC_K3_AM62A7=y +CONFIG_TARGET_AM62A7_A53_EVM=y +CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am62a7-sk" +CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_DRIVERS_MISC=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_DMA=y +CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_ETH=y +CONFIG_SPL_NET=y +CONFIG_SPL_NET_VCI_STRING="AM62AX U-Boot A53 SPL" +CONFIG_SPL_SYSCON=y
