Hello smitha.vanga,
smitha.va...@wipro.com wrote:
> Hi Wolfgang,
>
> I am trying to bring up WR linux 2.6.38.2 on a custom target board based
> on mpc8247, We are using SCC1 for the serial console. Have initialized
> the scc node in the dts as below. Had set the bootargs as setenv
> bootargs mem=64M console=ttyCPM,9600n8 root=/dev/ram rw.
^^^
Try here a ttyCPM0 ...
... and this is a Linux related Question, so please use
"linuxppc-dev-requ...@lists.ozlabs.org" for example instead.
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
