From: Peng Fan <[email protected]>
The read_poll_timeout() macro breaks out of its loop when the condition
evaluates to true. The current code uses "!tx_complete" as the
condition, which means it exits immediately when tx_complete is false
(i.e., transmission has NOT completed yet), rather than waiting for
completion.
Fix the condition to "tx_complete" so that the poll loop waits until
the TCPC signals transmission success/failure/discard before
proceeding.
Without this fix, tcpm_pd_transmit() returns before the TCPC has
finished transmitting, causing the PD state machine to proceed with
stale tx_status values.
Fixes: 1db4c0ac77e3 ("usb: tcpm: add core framework")
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
---
Changes in V2:
Add R-b
Separate the patch from patchset:
https://lore.kernel.org/u-boot/[email protected]/
---
drivers/usb/tcpm/tcpm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/tcpm/tcpm.c b/drivers/usb/tcpm/tcpm.c
index 3061b466d7c..d6c0be82333 100644
--- a/drivers/usb/tcpm/tcpm.c
+++ b/drivers/usb/tcpm/tcpm.c
@@ -207,7 +207,7 @@ static int tcpm_pd_transmit(struct udevice *dev,
*/
timeout_us *= 5;
ret = read_poll_timeout(tcpm_transmit_helper, tx_complete,
- !tx_complete, false, timeout_us, dev);
+ tx_complete, false, timeout_us, dev);
if (ret < 0) {
dev_err(dev, "TCPM: PD transmit data failed: %d\n", ret);
return ret;
---
base-commit: a0a1e9f2f1dffed04ee52723ce957c07bb905c25
change-id: 20260618-tcpm-fix-ac71d74523fe
Best regards,
--
Peng Fan <[email protected]>
