From: Vaibhav Hiremath <hvaib...@ti.com> Switch from the legacy mmc driver to the new generic mmc driver.
This patch is based on similar patch for beagle[1]. [1] http://git.denx.de/?p=u-boot.git;a=commitdiff_plain;h=0cd31144240 Signed-off-by: Vaibhav Hiremath <hvaib...@ti.com> Signed-off-by: Sanjeev Premi <pr...@ti.com> --- board/ti/evm/evm.c | 9 +++++++++ include/configs/omap3_evm.h | 10 ++++++---- 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c index aaf3033..916a13e 100644 --- a/board/ti/evm/evm.c +++ b/board/ti/evm/evm.c @@ -33,6 +33,7 @@ #include <asm/arch/mem.h> #include <asm/arch/mux.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> #include <i2c.h> #include <asm/mach-types.h> #include "evm.h" @@ -192,3 +193,11 @@ int board_eth_init(bd_t *bis) #endif return rc; } + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + return 0; +} +#endif diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 6455b0e..72c00ab 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -99,7 +99,8 @@ #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} #define CONFIG_MMC 1 -#define CONFIG_OMAP3_MMC 1 +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 /* DDR - I use Micron DDR */ @@ -200,6 +201,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ + "mmcdev=0\0" \ "console=ttyS2,115200n8\0" \ "mmcargs=setenv bootargs console=${console} " \ "root=/dev/mmcblk0p2 rw " \ @@ -207,10 +209,10 @@ "nandargs=setenv bootargs console=${console} " \ "root=/dev/mtdblock4 rw " \ "rootfstype=jffs2\0" \ - "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source ${loadaddr}\0" \ - "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ @@ -220,7 +222,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc init; then " \ + "if mmc rescan ${mmcdev}; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ -- 1.6.2.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
