Restyle all Kconfigs for the rest of "drivers": Menu entries : no space left Menu attributes: 1 TAB Help text : 1 TAB + 2 spaces Replace '---help---' by 'help'
Signed-off-by: Johan Jonker <[email protected]> --- drivers/adc/Kconfig | 2 +- drivers/block/Kconfig | 8 +++--- drivers/bootcount/Kconfig | 4 +-- drivers/clk/Kconfig | 4 +-- drivers/clk/owl/Kconfig | 8 +++--- drivers/clk/renesas/Kconfig | 8 +++--- drivers/crypto/aspeed/Kconfig | 4 +-- drivers/crypto/fsl/Kconfig | 10 ++++---- drivers/ddr/fsl/Kconfig | 4 +-- drivers/dma/ti/Kconfig | 16 ++++++------ drivers/gpio/Kconfig | 48 +++++++++++++++++------------------ drivers/led/Kconfig | 2 +- drivers/memory/Kconfig | 16 ++++++------ drivers/mfd/Kconfig | 6 ++--- drivers/misc/Kconfig | 8 +++--- drivers/mmc/Kconfig | 8 +++--- drivers/mux/Kconfig | 12 ++++----- drivers/pci/Kconfig | 16 ++++++------ drivers/pci_endpoint/Kconfig | 8 +++--- drivers/phy/Kconfig | 14 +++++----- drivers/phy/qcom/Kconfig | 2 +- drivers/ram/aspeed/Kconfig | 10 ++++---- drivers/ram/octeon/Kconfig | 6 ++--- drivers/ram/stm32mp1/Kconfig | 36 +++++++++++++------------- drivers/reboot-mode/Kconfig | 18 ++++++------- drivers/rtc/Kconfig | 4 +-- drivers/serial/Kconfig | 16 ++++++------ drivers/smem/Kconfig | 30 +++++++++++----------- drivers/soc/ti/Kconfig | 4 +-- drivers/spi/Kconfig | 28 ++++++++++---------- drivers/spmi/Kconfig | 8 +++--- drivers/thermal/Kconfig | 32 +++++++++++------------ drivers/ufs/Kconfig | 4 +-- drivers/watchdog/Kconfig | 8 +++--- 34 files changed, 206 insertions(+), 206 deletions(-) diff --git a/drivers/adc/Kconfig b/drivers/adc/Kconfig index 2b45f9e5ebad..d5ef07954012 100644 --- a/drivers/adc/Kconfig +++ b/drivers/adc/Kconfig @@ -5,7 +5,7 @@ config ADC This enables ADC API for drivers, which allows driving ADC features by single and multi-channel methods for: - start/stop/get data for conversion of a single-channel selected by - a number or multi-channels selected by a bitmask + a number or multi-channels selected by a bitmask - get data mask (ADC resolution) ADC reference Voltage supply options: - methods for get Vdd/Vss reference Voltage values with polarity diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index adf338ab00c3..d44cf4bcb6bb 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -68,10 +68,10 @@ config BLKMAP bool "Composable virtual block devices (blkmap)" depends on BLK help - Create virtual block devices that are backed by various sources, - e.g. RAM, or parts of an existing block device. Though much more - rudimentary, it borrows a lot of ideas from Linux's device mapper - subsystem. + Create virtual block devices that are backed by various sources, + e.g. RAM, or parts of an existing block device. Though much more + rudimentary, it borrows a lot of ideas from Linux's device mapper + subsystem. Example use-cases: - Treat a region of RAM as a block device, i.e. a RAM disk. This let's diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index 4c0c8d89bb40..af6bd2f1a7d2 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -68,7 +68,7 @@ config BOOTCOUNT_ENV saveenv on all reboots, the environment variable "upgrade_available" is used. If "upgrade_available" is 0, "bootcount" is always 0. If "upgrade_available" is 1, - "bootcount" is incremented in the environment. + "bootcount" is incremented in the environment. So the Userspace Application must set the "upgrade_available" and "bootcount" variables to 0, if the system booted successfully. @@ -83,7 +83,7 @@ config BOOTCOUNT_AT91 depends on AT91SAM9XE config DM_BOOTCOUNT - bool "Boot counter in a device-model device" + bool "Boot counter in a device-model device" help Enables reading/writing the bootcount in a device-model based backing store. If an entry in /chosen/u-boot,bootcount-device diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index c2da7b3938b6..addcece4da36 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -134,8 +134,8 @@ config CLK_CDCE9XX bool "Enable CDCD9XX clock driver" depends on CLK && ARCH_OMAP2PLUS help - Enable the clock synthesizer driver for CDCE913/925/937/949 - series of chips. + Enable the clock synthesizer driver for CDCE913/925/937/949 + series of chips. config CLK_ICS8N3QV01 bool "Enable ICS8N3QV01 VCXO driver" diff --git a/drivers/clk/owl/Kconfig b/drivers/clk/owl/Kconfig index c6afef90034e..5f3b8fe8ab46 100644 --- a/drivers/clk/owl/Kconfig +++ b/drivers/clk/owl/Kconfig @@ -1,8 +1,8 @@ config CLK_OWL - bool "Actions Semi OWL clock drivers" - depends on CLK && ARCH_OWL - help - Enable support for clock managemet unit present in Actions Semi + bool "Actions Semi OWL clock drivers" + depends on CLK && ARCH_OWL + help + Enable support for clock managemet unit present in Actions Semi Owl series S900/S700 SoCs. diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig index 72f99e9fa1bc..1893b6c41812 100644 --- a/drivers/clk/renesas/Kconfig +++ b/drivers/clk/renesas/Kconfig @@ -61,11 +61,11 @@ config CLK_RCAR_GEN3 Enable this to support the clocks on Renesas R-Car Gen3 and Gen4 SoCs. config CLK_R8A774A1 - bool "Renesas R8A774A1 clock driver" + bool "Renesas R8A774A1 clock driver" def_bool y if R8A774A1 - depends on CLK_RCAR_GEN3 - help - Enable this to support the clocks on Renesas R8A774A1 SoC. + depends on CLK_RCAR_GEN3 + help + Enable this to support the clocks on Renesas R8A774A1 SoC. config CLK_R8A774B1 bool "Renesas R8A774B1 clock driver" diff --git a/drivers/crypto/aspeed/Kconfig b/drivers/crypto/aspeed/Kconfig index 401225b8528d..71c8faa19df9 100644 --- a/drivers/crypto/aspeed/Kconfig +++ b/drivers/crypto/aspeed/Kconfig @@ -15,8 +15,8 @@ config ASPEED_ACRY bool "ASPEED RSA and ECC Engine" depends on ASPEED_AST2600 help - Select this option to enable a driver for using the RSA/ECC engine in - the ASPEED BMC SoCs. + Select this option to enable a driver for using the RSA/ECC engine in + the ASPEED BMC SoCs. Enabling this allows the use of RSA/ECC operations in hardware without requiring the software implementations. It also improves performance and saves code size. diff --git a/drivers/crypto/fsl/Kconfig b/drivers/crypto/fsl/Kconfig index eb01c6cf7003..1398b0033f06 100644 --- a/drivers/crypto/fsl/Kconfig +++ b/drivers/crypto/fsl/Kconfig @@ -27,27 +27,27 @@ config CAAM_64BIT config SYS_FSL_HAS_SEC bool help - Enable Freescale Secure Boot and Trusted Architecture + Enable Freescale Secure Boot and Trusted Architecture config SYS_FSL_SEC_COMPAT_2 bool help - Secure boot and trust architecture compatible version 2 + Secure boot and trust architecture compatible version 2 config SYS_FSL_SEC_COMPAT_4 bool help - Secure boot and trust architecture compatible version 4 + Secure boot and trust architecture compatible version 4 config SYS_FSL_SEC_COMPAT_5 bool help - Secure boot and trust architecture compatible version 5 + Secure boot and trust architecture compatible version 5 config SYS_FSL_SEC_COMPAT_6 bool help - Secure boot and trust architecture compatible version 6 + Secure boot and trust architecture compatible version 6 config SYS_FSL_SEC_BE bool "Big-endian access to Freescale Secure Boot" diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig index 7f8f3570dd8c..b11fa79ca59f 100644 --- a/drivers/ddr/fsl/Kconfig +++ b/drivers/ddr/fsl/Kconfig @@ -21,12 +21,12 @@ if SYS_FSL_DDR || SYS_FSL_MMDC config SYS_FSL_DDR_BE bool help - Access DDR registers in big-endian + Access DDR registers in big-endian config SYS_FSL_DDR_LE bool help - Access DDR registers in little-endian + Access DDR registers in little-endian config FSL_DDR_BIST bool diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig index d904982c8004..8c9b377e8a38 100644 --- a/drivers/dma/ti/Kconfig +++ b/drivers/dma/ti/Kconfig @@ -3,14 +3,14 @@ if ARCH_K3 config TI_K3_NAVSS_UDMA - bool "Texas Instruments UDMA" - depends on ARCH_K3 - select DEVRES - select DMA - select TI_K3_NAVSS_RINGACC - select TI_K3_PSIL - help - Support for UDMA used in K3 devices. + bool "Texas Instruments UDMA" + depends on ARCH_K3 + select DEVRES + select DMA + select TI_K3_NAVSS_RINGACC + select TI_K3_PSIL + help + Support for UDMA used in K3 devices. endif config TI_K3_PSIL diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 685e654c7220..5b71e41b8d22 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -294,9 +294,9 @@ config MAX7320_GPIO bool "MAX7320 I2C GPIO Expander driver" depends on DM_GPIO && DM_I2C help - Support for MAX7320 I2C 8/16-bit GPIO expander. - original maxim device has 8 push/pull outputs, - some clones offers 16bit. + Support for MAX7320 I2C 8/16-bit GPIO expander. + original maxim device has 8 push/pull outputs, + some clones offers 16bit. config MAX77663_GPIO bool "MAX77663 GPIO cell of PMIC driver" @@ -313,23 +313,23 @@ config MCP230XX_GPIO help Support for Microchip's MCP230XX I2C connected GPIO devices. The following chips are supported: - - MCP23008 - - MCP23017 - - MCP23018 - - MCP23S08 - - MCP23S17 - - MCP23S18 + - MCP23008 + - MCP23017 + - MCP23018 + - MCP23S08 + - MCP23S17 + - MCP23S18 config MSCC_SGPIO bool "Microsemi Serial GPIO driver" depends on DM_GPIO && SOC_VCOREIII help Support for the VCoreIII SoC serial GPIO device. By using a - serial interface, the SIO controller significantly extends - the number of available GPIOs with a minimum number of - additional pins on the device. The primary purpose of the - SIO controller is to connect control signals from SFP - modules and to act as an LED controller. + serial interface, the SIO controller significantly extends + the number of available GPIOs with a minimum number of + additional pins on the device. The primary purpose of the + SIO controller is to connect control signals from SFP + modules and to act as an LED controller. config MSM_GPIO bool "Qualcomm GPIO driver" @@ -404,8 +404,8 @@ config PCF8575_GPIO bool "PCF8575 I2C GPIO Expander driver" depends on DM_GPIO && DM_I2C help - Support for PCF8575 I2C 16-bit GPIO expander. Most of these - chips are from NXP and TI. + Support for PCF8575 I2C 16-bit GPIO expander. Most of these + chips are from NXP and TI. config RCAR_GPIO bool "Renesas R-Car GPIO driver" @@ -459,9 +459,9 @@ config SUNXI_GPIO config SUNXI_NEW_PINCTRL bool depends on SUNXI_GPIO - ---help--- - The Allwinner D1 and other new SoCs use a different register map - for the GPIO block, which we need to know about in the SPL. + help + The Allwinner D1 and other new SoCs use a different register map + for the GPIO block, which we need to know about in the SPL. config XILINX_GPIO bool "Xilinx GPIO driver" @@ -728,15 +728,15 @@ config SLG7XL45106_I2C_GPO bool "slg7xl45106 i2c gpo expander" depends on DM_GPIO && ARCH_ZYNQMP help - Support for slg7xl45106 i2c gpo expander. It is an i2c based - 8-bit gpo expander, all gpo lines are controlled by writing - value into data register. + Support for slg7xl45106 i2c gpo expander. It is an i2c based + 8-bit gpo expander, all gpo lines are controlled by writing + value into data register. config GPIO_SCMI bool "SCMI GPIO pinctrl driver" depends on DM_GPIO && PINCTRL_SCMI help - Support pinctrl GPIO over the SCMI interface. + Support pinctrl GPIO over the SCMI interface. config ADP5585_GPIO bool "ADP5585 GPIO driver" @@ -761,6 +761,6 @@ config MPFS_GPIO bool "Enable Polarfire SoC GPIO driver" depends on DM_GPIO help - Enable to support the GPIO driver on Polarfire SoC + Enable to support the GPIO driver on Polarfire SoC endif diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig index de95a1debdc5..04ebc24e8cfb 100644 --- a/drivers/led/Kconfig +++ b/drivers/led/Kconfig @@ -133,7 +133,7 @@ config LED_GPIO config SPL_LED_GPIO bool "LED support for GPIO-connected LEDs in SPL" - depends on SPL_LED && SPL_DM_GPIO + depends on SPL_LED && SPL_DM_GPIO help This option is an SPL-variant of the LED_GPIO option. See the help of LED_GPIO for details. diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index 591d9d9c6569..82d0fa803965 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -44,15 +44,15 @@ config STM32_OMM This driver manages the muxing between the 2 OSPI busses and the 2 output ports. There are 4 possible muxing configurations: - direct mode (no multiplexing): OSPI1 output is on port 1 and OSPI2 - output is on port 2 + output is on port 2 - OSPI1 and OSPI2 are multiplexed over the same output port 1 - swapped mode (no multiplexing), OSPI1 output is on port 2, - OSPI2 output is on port 1 + OSPI2 output is on port 1 - OSPI1 and OSPI2 are multiplexed over the same output port 2 It also manages : - - the split of the memory area shared between the 2 OSPI instances. - - chip select selection override. - - the time between 2 transactions in multiplexed mode. + - the split of the memory area shared between the 2 OSPI instances. + - chip select selection override. + - the time between 2 transactions in multiplexed mode. config TI_AEMIF tristate "Texas Instruments AEMIF driver" @@ -71,9 +71,9 @@ config TI_GPMC depends on MEMORY && CLK && OF_CONTROL help This driver is for the General Purpose Memory Controller (GPMC) - present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows - interfacing to a variety of asynchronous as well as synchronous - memory drives like NOR, NAND, OneNAND, SRAM. + present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows + interfacing to a variety of asynchronous as well as synchronous + memory drives like NOR, NAND, OneNAND, SRAM. if TI_GPMC config TI_GPMC_DEBUG diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index ae53b02f27c8..79f4db9849cf 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1,4 +1,4 @@ config MFD_ATMEL_SMC - bool "Atmel Static Memory Controller driver" - help - Say yes here to support Atmel Static Memory Controller driver. + bool "Atmel Static Memory Controller driver" + help + Say yes here to support Atmel Static Memory Controller driver. diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 0b52515c7009..bde5c640de85 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -71,9 +71,9 @@ config ATSHA204A select BITREVERSE depends on MISC help - Enable support for I2C connected Atmel's ATSHA204A - CryptoAuthentication module found for example on the Turris Omnia - board. + Enable support for I2C connected Atmel's ATSHA204A + CryptoAuthentication module found for example on the Turris Omnia + board. config GATEWORKS_SC bool "Gateworks System Controller Support" @@ -94,7 +94,7 @@ config QCOM_GENI etc. config ROCKCHIP_EFUSE - bool "Rockchip e-fuse support" + bool "Rockchip e-fuse support" depends on MISC help Enable (read-only) access for the e-fuse block found in Rockchip diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 24bd16ad5f3d..a46b8a63c505 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -332,7 +332,7 @@ config MMC_MESON_GX bool "Meson GX EMMC controller support" depends on ARCH_MESON help - Support for EMMC host controller on Meson GX ARM SoCs platform (S905) + Support for EMMC host controller on Meson GX ARM SoCs platform (S905) config MMC_OWL bool "Actions OWL Multimedia Card Interface support" @@ -659,8 +659,8 @@ config MMC_SDHCI_MSM depends on MMC_SDHCI && ARCH_SNAPDRAGON help Enables support for SDHCI 2.0 controller present on some Qualcomm - Snapdragon devices. This device is compatible with eMMC v4.5 and - SD 3.0 specifications. Both SD and eMMC devices are supported. + Snapdragon devices. This device is compatible with eMMC v4.5 and + SD 3.0 specifications. Both SD and eMMC devices are supported. Card-detect gpios are not supported. config MMC_SDHCI_MV @@ -852,7 +852,7 @@ config FTSDC010_SDIO bool "Support ftsdc010 sdio" depends on FTSDC010 help - This can enable ftsdc010 sdio function. + This can enable ftsdc010 sdio function. config MMC_MTK bool "MediaTek SD/MMC Card Interface support" diff --git a/drivers/mux/Kconfig b/drivers/mux/Kconfig index de74e5d5e4ed..383dac532c15 100644 --- a/drivers/mux/Kconfig +++ b/drivers/mux/Kconfig @@ -5,17 +5,17 @@ config MULTIPLEXER depends on DM select DEVRES help - The mux framework is a minimalistic subsystem that handles multiplexer - controllers. It provides the same API as Linux and mux drivers should - be portable with a minimum effort. + The mux framework is a minimalistic subsystem that handles multiplexer + controllers. It provides the same API as Linux and mux drivers should + be portable with a minimum effort. if MULTIPLEXER config SPL_MUX_MMIO bool "MMIO register bitfield-controlled Multiplexer" - depends on MULTIPLEXER && SYSCON - help - MMIO register bitfield-controlled Multiplexer controller. + depends on MULTIPLEXER && SYSCON + help + MMIO register bitfield-controlled Multiplexer controller. The driver builds multiplexer controllers for bitfields in a syscon register. For N bit wide bitfields, there will be 2^N possible diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 39df0e776df8..9ffccc3a80b7 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -101,11 +101,11 @@ config PCI_ENHANCED_ALLOCATION devices in place of traditional BARS for allocation of resources. config PCI_ARID - bool "Enable Alternate Routing-ID support for PCI" - help - Say Y here if you want to enable Alternate Routing-ID capability - support on PCI devices. This helps to skip some devices in BDF - scan that are not present. + bool "Enable Alternate Routing-ID support for PCI" + help + Say Y here if you want to enable Alternate Routing-ID capability + support on PCI devices. This helps to skip some devices in BDF + scan that are not present. config PCI_SCAN_SHOW bool "Show PCI devices during startup" @@ -287,7 +287,7 @@ config PCI_IOMMU_EXTRA_MAPPINGS the node describing the PCI controller. The intent is to cover SR-IOV scenarios which need mappings for VFs and PCI hot-plug scenarios. More documentation can be found under: - arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra + arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra config PCIE_LAYERSCAPE_EP bool "Layerscape PCIe Endpoint mode support" @@ -440,8 +440,8 @@ config PCIE_XILINX_NWL bool "Xilinx NWL PCIe controller" depends on ARCH_ZYNQMP help - Say 'Y' here if you want support for Xilinx / AMD NWL PCIe - controller as Root Port. + Say 'Y' here if you want support for Xilinx / AMD NWL PCIe + controller as Root Port. config PCIE_PLDA_COMMON bool diff --git a/drivers/pci_endpoint/Kconfig b/drivers/pci_endpoint/Kconfig index 9900481daa6b..d1db4951a0c6 100644 --- a/drivers/pci_endpoint/Kconfig +++ b/drivers/pci_endpoint/Kconfig @@ -9,10 +9,10 @@ config PCI_ENDPOINT bool "PCI Endpoint Support" depends on DM help - Enable this configuration option to support configurable PCI - endpoints. This should be enabled if the platform has a PCI - controllers that can operate in endpoint mode (as a device - connected to PCI host or bridge). + Enable this configuration option to support configurable PCI + endpoints. This should be enabled if the platform has a PCI + controllers that can operate in endpoint mode (as a device + connected to PCI host or bridge). config PCIE_CADENCE_EP bool "Cadence PCIe endpoint controller" diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 5c8ec2b146fa..0686c2e084b2 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -72,11 +72,11 @@ config AB8500_USB_PHY Support for the USB OTG PHY in ST-Ericsson AB8500. config APPLE_ATCPHY - bool "Apple Type-C PHY Driver" - depends on PHY && ARCH_APPLE - default y - help - Support for the Apple Type-C PHY. + bool "Apple Type-C PHY Driver" + depends on PHY && ARCH_APPLE + default y + help + Support for the Apple Type-C PHY. This is a dummy driver since the PHY is initialized sufficiently by previous stage firmware. @@ -249,14 +249,14 @@ config MT7620_USB_PHY depends on PHY depends on SOC_MT7620 help - Support the intergated USB PHY in MediaTek MT7620 SoC + Support the intergated USB PHY in MediaTek MT7620 SoC config MT76X8_USB_PHY bool "MediaTek MT76x8 (7628/88) USB PHY support" depends on PHY depends on SOC_MT7628 help - Support the USB PHY in MT76x8 SoCs + Support the USB PHY in MT76x8 SoCs This PHY is found on MT76x8 devices supporting USB. diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig index 49f830abf01a..5283ccbb6b34 100644 --- a/drivers/phy/qcom/Kconfig +++ b/drivers/phy/qcom/Kconfig @@ -2,7 +2,7 @@ config MSM8916_USB_PHY bool select PHY help - Support the Qualcomm MSM8916 USB PHY + Support the Qualcomm MSM8916 USB PHY This PHY is found on qualcomm dragonboard410c development board. diff --git a/drivers/ram/aspeed/Kconfig b/drivers/ram/aspeed/Kconfig index e4918460de67..320f38c06d6c 100644 --- a/drivers/ram/aspeed/Kconfig +++ b/drivers/ram/aspeed/Kconfig @@ -4,7 +4,7 @@ menuconfig ASPEED_RAM depends on ARCH_ASPEED || TARGET_ASPEED_AST2700_IBEX default ARCH_ASPEED help - Configuration options for DDR SDRAM on ASPEED systems. + Configuration options for DDR SDRAM on ASPEED systems. RAM initialisation is always built in for the platform. This menu allows customisation of the configuration used. @@ -13,10 +13,10 @@ config ASPEED_DDR4_DUALX8 bool "Enable Dual X8 DDR4 die" depends on ASPEED_RAM help - Say Y if dual X8 DDR4 die is used on the board. The ASPEED DDRM - SRAM controller needs to know if the memory chip mounted on the - board is dual x8 die or not, otherwise it may get the wrong - size of the memory space. + Say Y if dual X8 DDR4 die is used on the board. The ASPEED DDRM + SRAM controller needs to know if the memory chip mounted on the + board is dual x8 die or not, otherwise it may get the wrong + size of the memory space. config ASPEED_BYPASS_SELFTEST depends on ASPEED_RAM diff --git a/drivers/ram/octeon/Kconfig b/drivers/ram/octeon/Kconfig index f19957293f95..37bf48514007 100644 --- a/drivers/ram/octeon/Kconfig +++ b/drivers/ram/octeon/Kconfig @@ -2,14 +2,14 @@ config RAM_OCTEON bool "Ram drivers for Octeon SoCs" depends on RAM && ARCH_OCTEON help - This enables support for RAM drivers for Octeon SoCs. + This enables support for RAM drivers for Octeon SoCs. if RAM_OCTEON config RAM_OCTEON_DDR4 bool "Octeon III DDR4 RAM support" help - This enables support for DDR4 RAM suppoort for Octeon III. This does - not include support for Octeon CN70XX. + This enables support for DDR4 RAM suppoort for Octeon III. This does + not include support for Octeon CN70XX. endif # RAM_OCTEON diff --git a/drivers/ram/stm32mp1/Kconfig b/drivers/ram/stm32mp1/Kconfig index 1aaf064c30cf..76bd17a8874b 100644 --- a/drivers/ram/stm32mp1/Kconfig +++ b/drivers/ram/stm32mp1/Kconfig @@ -6,43 +6,43 @@ config STM32MP1_DDR select SPL_RAM if SPL default y help - activate STM32MP1 DDR controller driver for STM32MP1 soc - family: support for LPDDR2, LPDDR3 and DDR3 - the SDRAM parameters for controleur and phy need to be provided - in device tree (computed by DDR tuning tools) + activate STM32MP1 DDR controller driver for STM32MP1 soc + family: support for LPDDR2, LPDDR3 and DDR3 + the SDRAM parameters for controleur and phy need to be provided + in device tree (computed by DDR tuning tools) config STM32MP1_DDR_INTERACTIVE bool "STM32MP1 DDR driver : interactive support" depends on STM32MP1_DDR help - activate interactive support in STM32MP1 DDR controller driver - used for DDR tuning tools - to enter in intercative mode type 'd' during SPL DDR driver - initialisation + activate interactive support in STM32MP1 DDR controller driver + used for DDR tuning tools + to enter in intercative mode type 'd' during SPL DDR driver + initialisation config STM32MP1_DDR_INTERACTIVE_FORCE bool "STM32MP1 DDR driver : force interactive mode" depends on STM32MP1_DDR_INTERACTIVE help - force interactive mode in STM32MP1 DDR controller driver - skip the polling of character 'd' in console - useful when SPL is loaded in sysram - directly by programmer + force interactive mode in STM32MP1 DDR controller driver + skip the polling of character 'd' in console + useful when SPL is loaded in sysram + directly by programmer config STM32MP1_DDR_TESTS bool "STM32MP1 DDR driver : tests support" depends on STM32MP1_DDR_INTERACTIVE default y help - activate test support for interactive support in - STM32MP1 DDR controller driver: command test + activate test support for interactive support in + STM32MP1 DDR controller driver: command test config STM32MP1_DDR_TUNING bool "STM32MP1 DDR driver : support of tuning" depends on STM32MP1_DDR_INTERACTIVE default y help - activate tuning command in STM32MP1 DDR interactive mode - used for DDR tuning tools - - DQ Deskew algorithm - - DQS Trimming + activate tuning command in STM32MP1 DDR interactive mode + used for DDR tuning tools + - DQ Deskew algorithm + - DQS Trimming diff --git a/drivers/reboot-mode/Kconfig b/drivers/reboot-mode/Kconfig index 72b33d712235..3fdb4218a8b0 100644 --- a/drivers/reboot-mode/Kconfig +++ b/drivers/reboot-mode/Kconfig @@ -11,26 +11,26 @@ config DM_REBOOT_MODE depends on DM select DEVRES help - Enable support for reboot mode control. This will allow users to - adjust the boot process based on reboot mode parameter - passed to U-Boot. + Enable support for reboot mode control. This will allow users to + adjust the boot process based on reboot mode parameter + passed to U-Boot. config DM_REBOOT_MODE_GPIO bool "Use GPIOs as reboot mode backend" depends on DM_REBOOT_MODE help - Use GPIOs to control the reboot mode. This will allow users to boot - a device in a specific mode by using a GPIO that can be controlled - outside U-Boot. + Use GPIOs to control the reboot mode. This will allow users to boot + a device in a specific mode by using a GPIO that can be controlled + outside U-Boot. config DM_REBOOT_MODE_RTC bool "Use RTC as reboot mode backend" depends on DM_RTC depends on DM_REBOOT_MODE help - Use RTC non volatile memory to control the reboot mode. This will allow users to boot - a device in a specific mode by using a register(s) that can be controlled - outside U-Boot (e.g. Kernel). + Use RTC non volatile memory to control the reboot mode. This will allow users to boot + a device in a specific mode by using a register(s) that can be controlled + outside U-Boot (e.g. Kernel). config REBOOT_MODE_NVMEM bool "Use NVMEM reboot mode" diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 65d9bf533cb1..dac47b539b42 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -44,8 +44,8 @@ config VPL_DM_RTC config RTC_ENABLE_32KHZ_OUTPUT bool "Enable RTC 32Khz output" help - Some real-time clocks support the output of 32kHz square waves (such as ds3231), - the config symbol choose Real Time Clock device 32Khz output feature. + Some real-time clocks support the output of 32kHz square waves (such as ds3231), + the config symbol choose Real Time Clock device 32Khz output feature. config RTC_ARMADA38X bool "Enable Armada 38x Marvell SoC RTC" diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 5f8b98f07047..68225cf9ceb2 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -759,11 +759,11 @@ config MVEBU_A3700_UART config MCFUART bool "Freescale ColdFire UART support" depends on M68K - help - Choose this option to add support for UART driver on the ColdFire - SoC's family. The serial communication channel provides a full-duplex - asynchronous/synchronous receiver and transmitter deriving an - operating frequency from the internal bus clock or an external clock. + help + Choose this option to add support for UART driver on the ColdFire + SoC's family. The serial communication channel provides a full-duplex + asynchronous/synchronous receiver and transmitter deriving an + operating frequency from the internal bus clock or an external clock. config MXC_UART bool "IMX serial port support" @@ -1027,9 +1027,9 @@ config OCTEON_SERIAL_BOOTCMD select SYS_IS_IN_ENV select CONSOLE_MUX help - This driver supports remote input over the PCIe bus from a host - to U-Boot for entering commands. It is utilized by the host - commands 'oct-remote-load' and 'oct-remote-bootcmd'. + This driver supports remote input over the PCIe bus from a host + to U-Boot for entering commands. It is utilized by the host + commands 'oct-remote-load' and 'oct-remote-bootcmd'. config OCTEON_SERIAL_PCIE_CONSOLE bool "MIPS Octeon PCIe remote console" diff --git a/drivers/smem/Kconfig b/drivers/smem/Kconfig index e5d7dcc81b17..5b68ad5f10fd 100644 --- a/drivers/smem/Kconfig +++ b/drivers/smem/Kconfig @@ -4,22 +4,22 @@ menuconfig SMEM if SMEM config SANDBOX_SMEM - bool "Sandbox Shared Memory Manager (SMEM)" - depends on SANDBOX && DM - help - enable SMEM support for sandbox. This is an emulation of a real SMEM - manager. - The sandbox driver allocates a shared memory from the heap and - initialzies it on start. + bool "Sandbox Shared Memory Manager (SMEM)" + depends on SANDBOX && DM + help + enable SMEM support for sandbox. This is an emulation of a real SMEM + manager. + The sandbox driver allocates a shared memory from the heap and + initialzies it on start. config MSM_SMEM - bool "Qualcomm Shared Memory Manager (SMEM)" - depends on DM - depends on ARCH_SNAPDRAGON || ARCH_IPQ40XX - select DEVRES - help - Enable support for the Qualcomm Shared Memory Manager. - The driver provides an interface to items in a heap shared among all - processors in a Qualcomm platform. + bool "Qualcomm Shared Memory Manager (SMEM)" + depends on DM + depends on ARCH_SNAPDRAGON || ARCH_IPQ40XX + select DEVRES + help + Enable support for the Qualcomm Shared Memory Manager. + The driver provides an interface to items in a heap shared among all + processors in a Qualcomm platform. endif # menu "SMEM Support" diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig index 36129cb72f68..9734bf32cb06 100644 --- a/drivers/soc/ti/Kconfig +++ b/drivers/soc/ti/Kconfig @@ -21,8 +21,8 @@ config TI_KEYSTONE_SERDES bool "Keystone SerDes driver for ethernet" depends on ARCH_KEYSTONE help - SerDes driver for Keystone SoC used for ethernet support on TI - K2 platforms. + SerDes driver for Keystone SoC used for ethernet support on TI + K2 platforms. config TI_PRUSS bool "Support for TI's K3 based Pruss driver" diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index cfbedd64c4c4..009dd997efba 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -2,10 +2,10 @@ menuconfig SPI bool "SPI Support" help The "Serial Peripheral Interface" is a low level synchronous - protocol. Chips that support SPI can have data transfer rates - up to several tens of Mbit/sec. Chips are addressed with a - controller and a chipselect. Most SPI slaves don't support - dynamic device discovery; some are even write-only or read-only. + protocol. Chips that support SPI can have data transfer rates + up to several tens of Mbit/sec. Chips are addressed with a + controller and a chipselect. Most SPI slaves don't support + dynamic device discovery; some are even write-only or read-only. SPI is widely used by microcontrollers to talk with sensors, eeprom and flash memory, codecs and various other controller @@ -200,11 +200,11 @@ config CADENCE_XSPI by using the Auto Command work mode. config CF_SPI - bool "ColdFire SPI driver" - depends on M68K - help - Enable the ColdFire SPI driver. This driver can be used on - some m68k SoCs. + bool "ColdFire SPI driver" + depends on M68K + help + Enable the ColdFire SPI driver. This driver can be used on + some m68k SoCs. config CV1800B_SPIF bool "Sophgo cv1800b SPI Flash Controller driver" @@ -352,7 +352,7 @@ config MTK_SNOR select DEVRES help Enable the Mediatek SPINOR controller driver. This driver has - better read/write performance with NOR. + better read/write performance with NOR. config MTK_SNFI_SPI bool "Mediatek SPI memory controller driver" @@ -544,8 +544,8 @@ config SPI_SIFIVE config SOFT_SPI bool "Soft SPI driver" help - Enable Soft SPI driver. This driver is to use GPIO simulate - the SPI protocol. + Enable Soft SPI driver. This driver is to use GPIO simulate + the SPI protocol. config SPI_SN_F_OSPI tristate "Socionext F_OSPI SPI flash controller" @@ -673,8 +673,8 @@ config ZYNQMP_GQSPI config SPI_STACKED_PARALLEL bool "Enable support for stacked or parallel memories" help - Enable support for stacked/or parallel memories. This functionality - may appear on Xilinx hardware. By default this is disabled. + Enable support for stacked/or parallel memories. This functionality + may appear on Xilinx hardware. By default this is disabled. endif # if DM_SPI diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig index ab4878ebae4e..e28fd9af1d02 100644 --- a/drivers/spmi/Kconfig +++ b/drivers/spmi/Kconfig @@ -3,7 +3,7 @@ menu "SPMI support" config SPMI bool "Enable SPMI bus support" depends on DM - ---help--- + help Select this to enable to support SPMI bus. SPMI (System Power Management Interface) bus is used to connect PMIC devices on various SoCs. @@ -11,13 +11,13 @@ config SPMI config SPMI_MSM bool "Support Qualcomm SPMI bus" depends on SPMI - ---help--- + help Support SPMI bus implementation found on Qualcomm Snapdragon SoCs. config SPMI_SANDBOX bool "Support for Sandbox SPMI bus" depends on SPMI - ---help--- + help Demo SPMI bus implementation. Emulates part of PM8916 as single - slave (0) on bus. It has 4 GPIO peripherals, pid 0xC0-0xC3. + slave (0) on bus. It has 4 GPIO peripherals, pid 0xC0-0xC3. endmenu diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index c46dca60f60a..b5cc494179af 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -13,9 +13,9 @@ config IMX_THERMAL depends on MX6 || MX7 help Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs. - It supports one critical trip point and one passive trip point. The - cpufreq is used as the cooling device to throttle CPUs when the - passive trip is crossed. + It supports one critical trip point and one passive trip point. The + cpufreq is used as the cooling device to throttle CPUs when the + passive trip is crossed. config IMX_SCU_THERMAL bool "Temperature sensor driver for NXP i.MX8" @@ -27,11 +27,11 @@ config IMX_SCU_THERMAL trip is crossed config IMX_TMU - bool "Thermal Management Unit driver for NXP i.MX8M and iMX93" - depends on ARCH_IMX8M || IMX93 - help - Support for Temperature sensors on NXP i.MX8M and iMX93. - It supports one critical trip point and one passive trip point. + bool "Thermal Management Unit driver for NXP i.MX8M and iMX93" + depends on ARCH_IMX8M || IMX93 + help + Support for Temperature sensors on NXP i.MX8M and iMX93. + It supports one critical trip point and one passive trip point. The boot is hold to the cool device to throttle CPUs when the passive trip is crossed @@ -44,15 +44,15 @@ config RCAR_GEN3_THERMAL driver into the U-Boot thermal framework. config TI_DRA7_THERMAL - bool "Temperature sensor driver for TI dra7xx SOCs" - help - Enable thermal support for the Texas Instruments DRA752 SoC family. - The driver supports reading CPU temperature. + bool "Temperature sensor driver for TI dra7xx SOCs" + help + Enable thermal support for the Texas Instruments DRA752 SoC family. + The driver supports reading CPU temperature. config TI_LM74_THERMAL - bool "Temperature sensor driver for TI LM74 chip" - help - Enable thermal support for the Texas Instruments LM74 chip. - The driver supports reading CPU temperature. + bool "Temperature sensor driver for TI LM74 chip" + help + Enable thermal support for the Texas Instruments LM74 chip. + The driver supports reading CPU temperature. endif # if DM_THERMAL diff --git a/drivers/ufs/Kconfig b/drivers/ufs/Kconfig index 49472933de36..0b5df54e8fb6 100644 --- a/drivers/ufs/Kconfig +++ b/drivers/ufs/Kconfig @@ -19,7 +19,7 @@ config UFS_AMD_VERSAL2 config UFS_CADENCE bool "Cadence platform driver for UFS" depends on UFS - help + help This selects the platform driver for the Cadence UFS host controller present on present TI's J721e devices. @@ -51,7 +51,7 @@ config UFS_PCI config UFS_QCOM bool "Qualcomm Host Controller driver for UFS" depends on UFS && ARCH_SNAPDRAGON - help + help This selects the platform driver for the UFS host controller present on Qualcomm Snapdragon SoCs. diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 9ea617f1e435..0f4a54425b98 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -383,10 +383,10 @@ config WDT_SBSA bool "SBSA watchdog timer support" depends on WDT help - Select this to enable SBSA watchdog timer. - This driver can operate ARM SBSA Generic Watchdog as a single stage. - In the single stage mode, when the timeout is reached, your system - will be reset by WS1. The first signal (WS0) is ignored. + Select this to enable SBSA watchdog timer. + This driver can operate ARM SBSA Generic Watchdog as a single stage. + In the single stage mode, when the timeout is reached, your system + will be reset by WS1. The first signal (WS0) is ignored. config WDT_SIEMENS_PMIC bool "Enable PMIC Watchdog Timer support for Siemens platforms" -- 2.39.5
