If you take a look at 96820a35, you'll see the original timeout was
CONFIG_SYS_HZ. Which is 1000. After the mentioned change, non-bulk timeout
was changed to 100. This causes timeout failures on the dreamplug platform
when trying to initialize the usb microsd reader.
Signed-off-by: Jason Cooper <u-b...@lakedaemon.net>
---
Changes since v1:
- Further research identified the commit (96820a35) causing the problem
and revealed the former timeout of 1000. Adjusted patch to use former
timeout.
- Removed RFC.
include/usb.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/usb.h b/include/usb.h
index 53603a5..06170cd 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -46,7 +46,7 @@
* This is the timeout to allow for submitting an urb in ms. We allow more
* time for a BULK device to react - some are slow.
*/
-#define USB_TIMEOUT_MS(pipe) (usb_pipebulk(pipe) ? 5000 : 100)
+#define USB_TIMEOUT_MS(pipe) (usb_pipebulk(pipe) ? 5000 : 1000)
/* device request (setup) */
struct devrequest {
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
