V1 Initial SPL support for OMAP3 was based on the old SPL
V2 Introduced major changes. It is based on the OMAP4-SPL patch by
Aneesh V and the new SPL Framework by Daniel Schwierzeck and Aneesh V
V3 Some small bug fixes and correct placed SOB.
V4 Corrected one bugfix and some style problems
V5 Exclude some nand objects from SPL, interface change for nand_spl
V6 Added nand_spl.c - git add mistake, some small changes
V7 integrates "[PATCH V0] omap-common: move early UART clock setup to
board.c", rewrite of image loading to use image headers, removed many
#ifdefs, use read functions from nand_base.c, some smaller changes
This is based on the following patches:
- New SPL framework (in u-boot-ti)
- OMAP4 SPL (in u-boot-ti)
Simon Schwarz (7):
omap-common/omap4: relocate early UART clock setup
omap3: Configure RAM bank 0 if in SPL
omap-common: add nand spl support
spl: add NAND Library to new SPL
spl: Add POWER library to new spl
omap3: new SPL structure support
devkit8000: Add nand-spl support for new SPL
arch/arm/cpu/armv7/omap-common/spl.c | 44 +++++-
arch/arm/cpu/armv7/omap3/board.c | 37 ++++-
arch/arm/cpu/armv7/omap3/config.mk | 30 +++
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 5 +
arch/arm/cpu/armv7/omap3/sdrc.c | 32 ++++-
arch/arm/cpu/armv7/omap4/board.c | 1 +
arch/arm/include/asm/arch-omap3/mem.h | 36 ++++
arch/arm/include/asm/arch-omap3/sys_proto.h | 1 +
arch/arm/include/asm/omap_common.h | 1 +
board/timll/devkit8000/devkit8000.c | 2 +-
doc/README.SPL | 2 +
drivers/mtd/nand/Makefile | 10 +-
drivers/mtd/nand/nand_base.c | 4 +-
drivers/mtd/nand/nand_spl_simple.c | 257 +++++++++++++++++++++++++++
drivers/mtd/nand/omap_gpmc.c | 27 +++
include/configs/devkit8000.h | 51 ++++++
include/nand.h | 7 +
spl/Makefile | 2 +
18 files changed, 539 insertions(+), 10 deletions(-)
create mode 100644 arch/arm/cpu/armv7/omap3/config.mk
create mode 100644 drivers/mtd/nand/nand_spl_simple.c
--
1.7.4.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
