We also have to shift TEXT_BASE to accomodate for the additional
code size.
Signed-off-by: Wolfgang Denk <w...@denx.de>
Cc: Kumar Gala <ga...@kernel.crashing.org>
---
board/stx/stxssa/stxssa.c | 8 ++++++++
include/configs/stxssa.h | 7 ++++++-
2 files changed, 14 insertions(+), 1 deletions(-)
diff --git a/board/stx/stxssa/stxssa.c b/board/stx/stxssa/stxssa.c
index 83ffcd2..c78538d 100644
--- a/board/stx/stxssa/stxssa.c
+++ b/board/stx/stxssa/stxssa.c
@@ -34,6 +34,7 @@
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <ioports.h>
#include <asm/io.h>
@@ -247,6 +248,13 @@ reset_phy(void)
#endif
}
+#ifdef CONFIG_OF_BOARD_SETUP
+void ft_board_setup (void *blob, bd_t *bd)
+{
+ ft_cpu_setup (blob, bd);
+}
+#endif /* CONFIG_OF_BOARD_SETUP */
+
int
board_early_init_f(void)
{
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index d5dd94f..141da26 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -43,7 +43,7 @@
#define CONFIG_STXSSA 1 /* Silicon Tx GPPP SSA board specific*/
#define CONFIG_MPC8560 1
-#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
+#define CONFIG_SYS_TEXT_BASE 0xFFF80000
#define CONFIG_PCI /* PCI ethernet support */
#define CONFIG_TSEC_ENET /* tsec ethernet support*/
@@ -194,6 +194,11 @@
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
/*
* I2C
*/
--
1.7.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
