The PHY driver was too verbose and corrupted the boot message display
like this:
...
Net: TSEC0 connected to Marvell 88E1111S
TSEC1 connected to Marvell 88E1111S
TSEC0, TSEC1
...
Turn printf() into debug() so we het the expected output again:
...
Net: TSEC0, TSEC1
...
Signed-off-by: Wolfgang Denk <w...@denx.de>
Cc: Kumar Gala <ga...@kernel.crashing.org>
---
drivers/net/phy/phy.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index c7edcc0..ce69c19 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -714,7 +714,7 @@ struct phy_device *phy_connect(struct mii_dev *bus, int
addr,
phydev->dev = dev;
- printf("%s connected to %s\n", dev->name, phydev->drv->name);
+ debug("%s connected to %s\n", dev->name, phydev->drv->name);
return phydev;
}
--
1.7.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
