Dear Andreas Bießmann: > Am 01.07.2011 16:47, schrieb Andreas Bießmann: > > The grasshopper board is a neat avr32 evaluation kit produced by In-Circuit > > GmbH. > > See http://www.ic-board.de/product_info.php?info=p75_ICnova-AP7000-Base.html > > for detailed information about this device. > > > > Signed-off-by: Andreas Bießmann <biessm...@corscience.de> > > --- > > changes since v1: > > - use vim: set noet ts=8 for 80 char per line checking > > - replace blank indention by tab indention > > - add board_early_init_r to explicitely set the phy address to 0x00 > > > > changes since v2: > > - add MAINTAINERS entry > > > > chganges since v3: > > - remove previous commit 'MAINTAINERS: convert to utf-8' -> encoding of > > this > > patch is defective since '�' in MAINTAINERS is ISO-8859-1 coded and > > everywhere else it is UTF-8 coded. > > > > MAINTAINERS | 1 + > > board/in-circuit/grasshopper/Makefile | 45 +++++++ > > board/in-circuit/grasshopper/grasshopper.c | 112 ++++++++++++++++ > > boards.cfg | 1 + > > include/configs/grasshopper.h | 198 > > ++++++++++++++++++++++++++++ > > 5 files changed, 357 insertions(+), 0 deletions(-) > > create mode 100644 board/in-circuit/grasshopper/Makefile > > create mode 100644 board/in-circuit/grasshopper/grasshopper.c > > create mode 100644 include/configs/grasshopper.h > > Any objections to this patch? v4 was out before the merge window closed. > I know you are right before your holiday ... but it would be great if > you take this too. No objections. Applied to u-boot-atmel/master. Thanks, Reinhard
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
