Dear Albert ARIBAUD, In message <4e243772.9030...@aribaud.net> you wrote: > Hi Wolfgang, > > The following changes since commit 68d4230c3ccce96a72c5b99e48399bf1796fe3c6: > > powerpc/85xx: Add default usb mode and phy type to hwconfig > (2011-07-11 13:24:21 -0500) > > are available in the git repository at: > git://git.denx.de/u-boot-arm.git master > > Albert ARIBAUD (1): > Remove volatile qualifier in get_ram_size() calls > > Chan-Taek Park (1): > TI: TNETV107X Fix Build Error > > David Jander (1): > ARM: MX5: Fix broken leftover TO-2 errata workaround > > Fabio Estevam (2): > mx31pdk: cosmetic: Fix line over 80 characters > mx27: Make the UART port number explicit > > Graeme Russ (1): > Timer: Fix misuse of ARM *timer_masked() functions outside arch/arm > > Igor Grinberg (1): > arm: add CONFIG_MACH_TYPE setting and documentation > > Jana Rapava (2): > EfikaMX: Use correct imximage.cfg > EfikaMX: Add missing CONFIG_SYS_TEXT_BASE > > Marek Vasut (1): > EfikaMX: Enable EXT2 booting > > Matthias Weisser (7): > build: Add targets for auto gen of asm-offsets.h and use it in imx35 > imx: Add get_tbclk() function for imx25 > imx: Use correct imx25 reset.c > imx: Add support for USB EHCI on imx25 > imx: Add auto generation of asm-offsets.h for imx25 > imx: Make imx25 compatible to mxc_gpio driver and fix in tx25 > imx: Add support for zmx25 board > > Rob Herring (2): > arm: add __ilog2 function > ARM: add missing CONFIG_SKIP_LOWLEVEL_INIT for armv7 > > Stefano Babic (3): > MX5: Update to autogenerated asm-offsets.h > MX27: Update to autogenerated asm-offsets.h > MX31: Cleanup clock function > > Torsten Koschorrek (2): > ARM: Update maintainer of board scb9328 > scb9328: Add ARM relocation support > > Yegor Yefremov (1): > am3517evm: change console device from ttyS2 to ttyO2 > > MAINTAINERS | 7 +- > README | 10 ++ > arch/arm/cpu/arm1136/mx31/generic.c | 21 +++- > arch/arm/cpu/arm1136/mx35/Makefile | 11 -- > arch/arm/cpu/arm926ejs/mx25/Makefile | 8 +- > arch/arm/cpu/arm926ejs/mx25/asm-offsets.c | 60 ++++++++ > arch/arm/cpu/arm926ejs/mx25/timer.c | 12 ++ > arch/arm/cpu/arm926ejs/mx27/Makefile | 2 + > arch/arm/cpu/arm926ejs/mx27/asm-offsets.c | 45 ++++++ > arch/arm/cpu/arm926ejs/mx27/generic.c | 2 +- > arch/arm/cpu/arm926ejs/orion5x/dram.c | 4 +- > arch/arm/cpu/armv7/mx5/Makefile | 2 + > arch/arm/cpu/armv7/mx5/asm-offsets.c | 76 ++++++++++ > arch/arm/cpu/armv7/mx5/lowlevel_init.S | 6 +- > arch/arm/cpu/armv7/start.S | 2 + > arch/arm/include/asm/arch-mx25/imx-regs.h | 49 ++++++- > arch/arm/include/asm/arch-mx25/macro.h | 64 ++++++++ > arch/arm/include/asm/arch-mx27/asm-offsets.h | 16 -- > arch/arm/include/asm/arch-mx27/imx-regs.h | 2 +- > arch/arm/include/asm/arch-mx31/clock.h | 11 +- > arch/arm/include/asm/arch-mx31/imx-regs.h | 2 +- > arch/arm/include/asm/arch-mx5/asm-offsets.h | 55 ------- > arch/arm/include/asm/arch-mx5/imx-regs.h | 18 +++ > arch/arm/include/asm/bitops.h | 5 + > arch/arm/lib/board.c | 4 + > board/BuS/eb_cpux9k2/cpux9k2.c | 2 +- > board/armadillo/flash.c | 6 +- > board/atmel/at91rm9200dk/flash.c | 10 +- > board/atmel/at91rm9200ek/at91rm9200ek.c | 2 +- > board/cerf250/flash.c | 14 +- > board/cm4008/flash.c | 10 +- > board/cm41xx/flash.c | 10 +- > board/cmc_pu2/flash.c | 11 +- > board/cradle/flash.c | 10 +- > board/csb226/flash.c | 10 +- > board/davedenx/qong/qong.c | 2 +- > board/davinci/common/misc.c | 2 +- > board/dnp1110/flash.c | 14 +- > board/efikamx/efikamx.c | 2 +- > board/ep7312/flash.c | 10 +- > board/eukrea/cpu9260/cpu9260.c | 2 +- > board/eukrea/cpuat91/cpuat91.c | 2 +- > board/freescale/mx31ads/mx31ads.c | 2 +- > board/freescale/mx31pdk/mx31pdk.c | 2 +- > board/freescale/mx51evk/mx51evk.c | 2 +- > board/freescale/mx53ard/mx53ard.c | 4 +- > board/freescale/mx53evk/mx53evk.c | 2 +- > board/freescale/mx53loco/mx53loco.c | 4 +- > board/freescale/mx53smd/mx53smd.c | 4 +- > board/gcplus/flash.c | 14 +- > board/impa7/flash.c | 10 +- > board/imx31_phycore/imx31_phycore.c | 2 +- > board/innokom/flash.c | 10 +- > board/karo/tx25/tx25.c | 32 ++-- > board/keymile/km_arm/km_arm.c | 2 +- > board/lart/flash.c | 10 +- > board/logicpd/imx27lite/imx27lite.c | 8 +- > board/logicpd/imx31_litekit/imx31_litekit.c | 2 +- > board/lpd7a40x/flash.c | 10 +- > board/lubbock/flash.c | 14 +- > board/modnet50/flash.c | 14 +- > board/mx1ads/mx1ads.c | 2 +- > board/mx1ads/syncflash.c | 2 +- > board/ns9750dev/flash.c | 15 +- > board/pleb2/flash.c | 18 +- > board/ronetix/pm9261/pm9261.c | 2 +- > board/ronetix/pm9263/pm9263.c | 2 +- > board/ronetix/pm9g45/pm9g45.c | 2 +- > board/samsung/smdk2400/flash.c | 10 +- > board/sbc2410x/flash.c | 10 +- > board/scb9328/config.mk | 10 -- > board/scb9328/flash.c | 5 +- > board/scb9328/scb9328.c | 24 +-- > board/shannon/flash.c | 10 +- > board/syteco/jadecpu/jadecpu.c | 2 +- > board/syteco/zmx25/Makefile | 51 +++++++ > board/syteco/zmx25/lowlevel_init.S | 110 ++++++++++++++ > board/syteco/zmx25/zmx25.c | 203 > ++++++++++++++++++++++++++ > board/ti/omap1610inn/flash.c | 15 +- > board/ti/omap730p2/flash.c | 15 +- > board/xaeniax/flash.c | 14 +- > board/xm250/flash.c | 23 ++-- > board/zylonite/flash.c | 14 +- > boards.cfg | 3 +- > common/memsize.c | 2 +- > drivers/mtd/spi/eeprom_m95xxx.c | 5 +- > drivers/net/fec_mxc.c | 6 +- > drivers/net/netarm_eth.c | 12 +- > drivers/spi/mxc_spi.c | 2 - > drivers/usb/host/ehci-mxc.c | 33 +++- > include/common.h | 2 +- > include/configs/am3517_evm.h | 2 +- > include/configs/efikamx.h | 3 + > include/configs/mx31pdk.h | 6 +- > include/configs/scb9328.h | 5 + > include/configs/tnetv107x_evm.h | 6 + > include/configs/zmx25.h | 180 > +++++++++++++++++++++++ > include/mxc_gpio.h | 5 + > rules.mk | 10 ++ > 99 files changed, 1242 insertions(+), 360 deletions(-) > create mode 100644 arch/arm/cpu/arm926ejs/mx25/asm-offsets.c > create mode 100644 arch/arm/cpu/arm926ejs/mx27/asm-offsets.c > create mode 100644 arch/arm/cpu/armv7/mx5/asm-offsets.c > create mode 100644 arch/arm/include/asm/arch-mx25/macro.h > delete mode 100644 arch/arm/include/asm/arch-mx27/asm-offsets.h > delete mode 100644 arch/arm/include/asm/arch-mx5/asm-offsets.h > delete mode 100644 board/scb9328/config.mk > create mode 100644 board/syteco/zmx25/Makefile > create mode 100644 board/syteco/zmx25/lowlevel_init.S > create mode 100644 board/syteco/zmx25/zmx25.c > create mode 100644 include/configs/zmx25.h
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de I know engineers. They love to change things. - Dr. McCoy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
