> -----Original Message----- > From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] > On Behalf Of Lei Wen > Sent: Sunday, July 17, 2011 12:54 PM > To: Gérald Kerma > Cc: Lei Wen; Yu Tang; Rob Herring; u-boot@lists.denx.de; Andy Fleming; > Ashish Karkare; Prabhanjan Sarnaik > Subject: Re: [U-Boot] [PATCH 1/2] MMC: add sdhci generic framework > > Hi Gérald, > > On Sun, Jul 17, 2011 at 3:20 PM, Gérald Kerma <gera...@gmail.com> wrote: > > Hello Lei, > > > > Le 29/06/2011 07:58, Lei Wen a écrit : > >> Hi Gérald, > >> > >> On Wed, Jun 29, 2011 at 1:53 PM, Gérald Kerma <gera...@gmail.com> > wrote: > >>> > Hello, > >>> > > >>> > Is this driver adaptable for sheevaplug ? > > > >> In the Linux kernel, the sdhci-dove.c does the similar way to support > >> the kirkwood. > > > > The linux kernel use mvsdio driver for kirkwood. > > > > MMC_MVSDIO > > Marvell MMC/SD/SDIO host driver > > This selects the Marvell SDIO host driver. > > SDIO may currently be found on the Kirkwood 88F6281 and 88F6192 > > SoC controllers. > > > > MMC_SDHCI_DOVE > > SDHCI support on Marvell's Dove SoC > > This selects the Secure Digital Host Controller Interface in > > Marvell's Dove SoC. > > > > a driver patch which use the old generic driver was adapted from > Marvell > > UBoot (mvsdio). > > > > It's not included in the Denx uboot mainline but is available in the > > Debian Uboot. > > > > I just don't object kirkwood to resue the old way. But since sdhci > could be a generic > framework, it is nice that denx mainline could also use sdhci for > kirkwood which is > actively maintained like in the linux kernel.
I don't see an issue here, if sdhci is more generic, it will support few more SoCs then it should go for mainlining. Regards.. Prafulla . . . > > Best regards, > Lei > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
