Signed-off-by: Wolfgang Denk <w...@denx.de>
Cc: Marius Gr�ger <m...@sysgo.de>
---
MAINTAINERS | 1 -
MAKEALL | 1 -
board/ep7312/Makefile | 55 -------
board/ep7312/config.mk | 28 ----
board/ep7312/ep7312.c | 66 --------
board/ep7312/flash.c | 341 ------------------------------------------
board/ep7312/lowlevel_init.S | 95 ------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/ep7312.h | 173 ---------------------
10 files changed, 1 insertions(+), 761 deletions(-)
delete mode 100644 board/ep7312/Makefile
delete mode 100644 board/ep7312/config.mk
delete mode 100644 board/ep7312/ep7312.c
delete mode 100644 board/ep7312/flash.c
delete mode 100644 board/ep7312/lowlevel_init.S
delete mode 100644 include/configs/ep7312.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 4538ce0..a7a246a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -651,7 +651,6 @@ Simon Guinot <simon.gui...@sequanux.org>
Marius Gr�ger <m...@sysgo.de>
impa7 ARM720T (EP7211)
- ep7312 ARM720T (EP7312)
Igor Grinberg <grinb...@compulab.co.il>
diff --git a/MAKEALL b/MAKEALL
index c59ebcf..4edf61d 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -303,7 +303,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- ep7312 \
evb4510 \
impa7 \
integratorap \
diff --git a/board/ep7312/Makefile b/board/ep7312/Makefile
deleted file mode 100644
index f2d8cf5..0000000
--- a/board/ep7312/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
-#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroe...@sysgo.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := ep7312.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ep7312/config.mk b/board/ep7312/config.mk
deleted file mode 100644
index bdd08b8..0000000
--- a/board/ep7312/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroe...@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc0f80000
diff --git a/board/ep7312/ep7312.c b/board/ep7312/ep7312.c
deleted file mode 100644
index 8ed14ad..0000000
--- a/board/ep7312/ep7312.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroe...@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <clps7111.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Activate LED flasher */
- IO_LEDFLSH = 0x40;
-
- /* arch number MACH_TYPE_EDB7312 */
- gd->bd->bi_arch_number = MACH_TYPE_EDB7312;
-
- /* location of boot parameters */
- gd->bd->bi_boot_params = 0xc0020100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/ep7312/flash.c b/board/ep7312/flash.c
deleted file mode 100644
index 0c2b3ae..0000000
--- a/board/ep7312/flash.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroe...@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE 0x1000000
-#define MAIN_SECT_SIZE 0x20000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf ("Intel: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
- printf ("28F128J3 (128Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- goto Done;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
-Done: ;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- int rc = ERR_OK;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (INTEL_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- if (info->protect[sect] == 0) { /* not protected */
- vu_short *addr = (vu_short *) (info->start[sect]);
-
- *addr = 0x20; /* erase setup */
- *addr = 0xD0; /* erase confirm */
-
- while ((*addr & 0x80) != 0x80) {
- if (get_timer_masked () >
CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = 0xB0; /* suspend erase */
- *addr = 0xFF; /* reset to read mode */
- rc = ERR_TIMOUT;
- goto outahere;
- }
- }
-
- /* clear status register command */
- *addr = 0x50;
- /* reset to read mode */
- *addr = 0xFF;
- }
- printf ("ok.\n");
- }
- if (ctrlc ())
- printf ("User Interrupt!\n");
-
- outahere:
-
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (flag)
- enable_interrupts ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ushort data)
-{
- vu_short *addr = (vu_short *) dest, val;
- int rc = ERR_OK;
- int flag;
-
- /* Check if Flash is (sufficiently) erased
- */
- if ((*addr & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
- /* clear status register command */
- *addr = 0x50;
-
- /* program set-up command */
- *addr = 0x40;
-
- /* latch address/data */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked ();
-
- /* wait while polling the status register */
- while (((val = *addr) & 0x80) != 0x80) {
- if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
- rc = ERR_TIMOUT;
- /* suspend program command */
- *addr = 0xB0;
- goto outahere;
- }
- }
-
- if (val & 0x1A) { /* check for error */
- printf ("\nFlash write error %02x at address %08lx\n",
- (int) val, (unsigned long) dest);
- if (val & (1 << 3)) {
- printf ("Voltage range error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if (val & (1 << 1)) {
- printf ("Device protect error.\n");
- rc = ERR_PROTECTED;
- goto outahere;
- }
- if (val & (1 << 4)) {
- printf ("Programming error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
-
- outahere:
- /* read array command */
- *addr = 0xFF;
-
- if (flag)
- enable_interrupts ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- ushort data;
- int l;
- int i, rc;
-
- wp = (addr & ~1); /* get lower word aligned
address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
- for (; i < 2 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 2) {
- data = *((vu_short *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- return write_word (info, wp, data);
-}
diff --git a/board/ep7312/lowlevel_init.S b/board/ep7312/lowlevel_init.S
deleted file mode 100644
index 5dadb31..0000000
--- a/board/ep7312/lowlevel_init.S
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Memory Setup stuff - taken from ???
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* some parameters for the board */
-
-SYSCON1: .long 0x80000100
-SYSCON2: .long 0x80001100
-SYSCON3: .long 0x80002200
-MEMCFG1: .long 0x80000180
-MEMCFG2: .long 0x800001C0
-SDCONF: .long 0x80002300
-SDRFPR: .long 0x80002340
-
-syscon1_val: .long 0x00040100
-syscon2_val: .long 0x00000102
-syscon3_val: .long 0x0000020E
-memcfg1_val: .long 0x1f101710
-memcfg2_mask: .long 0x0000ffff @ only set lower 16 bits
-memcfg2_val: .long 0x00001f13 @ upper 16 bits are reserved for CS7 + CS6
-sdrfpr_val: .long 0x00000240
-sdconf_val: .long 0x00000522
-/* setting up the memory */
-
-.globl lowlevel_init
-lowlevel_init:
- /*
- * SYSCON1-3
- */
- ldr r0, SYSCON1
- ldr r1, syscon1_val
- str r1, [r0]
-
- ldr r0, SYSCON2
- ldr r1, syscon2_val
- str r1, [r0]
-
- ldr r0, SYSCON3
- ldr r1, syscon3_val
- str r1, [r0]
-
- /*
- * MEMCFG1
- */
- ldr r0, MEMCFG1
- ldr r1, memcfg1_val
- str r1, [r0]
-
- /*
- * MEMCFG2
- */
- ldr r0, MEMCFG2
- ldr r2, [r0]
- ldr r1, memcfg2_mask
- bic r2, r2, r1
- ldr r1, memcfg2_val
- orr r2, r2, r1
- str r2, [r0]
-
- /*
- * SDRFPR,SDCONF
- */
- ldr r0, SDCONF
- ldr r1, sdconf_val
- str r1, [r0]
-
- ldr r0, SDRFPR
- ldr r1, sdrfpr_val
- str r1, [r0]
-
- /* everything is fine now */
- mov pc, lr
diff --git a/boards.cfg b/boards.cfg
index 373e17f..b5ad378 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -41,7 +41,6 @@ imx31_litekit arm arm1136 -
logicpd
mx35pdk arm arm1136 -
freescale mx35
omap2420h4 arm arm1136 - ti
omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti
tnetv107x
-ep7312 arm arm720t
impa7 arm arm720t
modnet50 arm arm720t
lpc2292sodimm arm arm720t - -
lpc2292
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 6a82a06..7200f16 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+ep7312 arm arm720t - 2011-07-16 Marius Gr�ger <m...@sysgo.de>
B2 arm s3c44b0 - 2011-07-16 Andrea Scian
<andrea.sc...@dave-tech.it>
armadillo arm arm720t - 2011-07-16 Rowel Atienza
<ro...@diwalabs.com>
ap720t arm ? - 2011-07-16
diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h
deleted file mode 100644
index fdb98b5..0000000
--- a/include/configs/ep7312.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroe...@sysgo.de>
- *
- * Configuation settings for the EP7312 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_EP7312 1 /* on an EP7312 Board */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
-
-#undef CONFIG_USE_IRQ /* don't need them anymore */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x20000000
-#define CONFIG_CS8900_BUS16
-#undef CONFIG_CS8900_BUS32
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CLPS7111_SERIAL
-#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 9600
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_JFFS2
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "devfs=mount root=ramfs
console=ttyS0,9600"
-#define CONFIG_ETHADDR 08:00:3e:21:c7:f7
-/*#define CONFIG_NETMASK 255.255.0.0 */
-/*#define CONFIG_IPADDR 172.22.2.128 */
-/*#define CONFIG_SERVERIP 172.22.2.126 */
-/*#define CONFIG_BOOTFILE "impa7" */
-#define CONFIG_BOOTCOMMAND "bootp;bootm"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial
port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to
save memory */
-#define CONFIG_SYS_PROMPT "EP7312 # " /* Monitor
Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O
Buffer Size */
-#define CONFIG_SYS_PBSIZE
(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number
of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot
Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on
*/
-#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM
*/
-
-#define CONFIG_SYS_LOAD_ADDR 0xc0500000 /* default load
address */
-
-#define CONFIG_SYS_HZ 2000 /* decrementer
freq: 2 kHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks
*/
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one
chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash
Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash
Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* Addr
of Environment Sector */
-#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment
Sector */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=ep7312-0"
-#define MTDPARTS_DEFAULT "mtdparts=ep7312-0:-(jffs2)"
-*/
-
-#endif /* __CONFIG_H */
--
1.7.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
