Hi Phani,
> I am using a MPC8572 costume board. I am using U-boot as the boot
> loader. I accidently made the bootdelay to 0 and I have the valid
> kernel , rootfs in flash. The bootargs is "root=/dev/ram rw
> console=ttyS0,115200".
>
>
>
> So I am not able to stop booting the board at the u-boot prompt. Can
> you pls let me know how can I access/change the uboot params from the
> Linux user application.
You can check if your configuration includes CONFIG_ZERO_BOOTDELAY_CHECK
(see doc/README.autoboot). In this case you should still be able to
stop the boot process by continuously hitting a key during startup.
If this is not the case, then you'll need to use the tool to change the
U-Boot environment from Linux. For details see tools/env/README. When
you have this working, simply adjust bootdelay again.
Cheers
Detlev
--
He who can properly define and divide is to be considered a god.
-- Plato
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: d...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
