Re: [PATCH v3 2/3] arm: mvebu: db-xc3-24g4xg: Remove marvell,nand-keep-config

[Stefan Roese]

On 12/18/25 23:59, Chris Packham wrote:

nand-keep-config is used to retain the NAND controller configuration
from an earlier boot stage. In U-Boot's case there isn't an earlier boot
stage so reconfiguring the NAND controller is required.

Signed-off-by: Chris Packham <judge.pack...@gmail.com>

Reviewed-by: Stefan Roese <stefan.ro...@mailbox.org>

Thanks,
Stefan

---

Notes:
     Changes in v2:
     - None

  arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi | 1 -
  1 file changed, 1 deletion(-)

diff --git a/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi 
b/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi
index dc20643bfa37..ad64813e7704 100644
--- a/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi
+++ b/arch/arm/dts/armada-xp-db-xc3-24g4xg-u-boot.dtsi
@@ -5,7 +5,6 @@
        status = "okay";
        label = "pxa3xx_nand-0";
        nand-rb = <0>;
-       marvell,nand-keep-config;
        nand-on-flash-bbt;
        nand-ecc-strength = <4>;
        nand-ecc-step-size = <512>;